WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
91 comments
Hi. Can you send me a WISP firmware for WR3600H?
@Dear Dmytro,
Please try to update the latest firmware of your Cudy. Then check if the problem is solved?
You can download the firmware for your Cudy based on the model of the device.
“https://www.cudy.com/pages/download-center/search”
“I have a problem that after Step 8 the router simply refuses to apply the new settings and reverts to factory settings instead. What shall I do?”
I have a problem that after Step 8 the router simply refuses to apply the new settings and reverts to factory settings instead. What shall I do?
@Dear Franc,
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.”
Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.