WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
79 comments
@Dear Luqman,
Sorry, Cudy routers don’t support PEAP protocol network currently.
“Hello. I’m trying to connect to a PEAP protocol network using ax3000 through wisp, the router can connect to it but unfortunately the light is still red, showing no connection to the internet. Can you help me.”
@Dear Asus,
Our technical support has sent you the firmware via email. Please check.
“Please send me the Cudy wr3600 beta firmware. Moreover, could you please inform me when will be available the wisp mode firmware update?”
Hello. I’m trying to connect to a PEAP protocol network using ax3000 through wisp, the router can connect to it but unfortunately the light is still red, showing no connection to the internet. Can you help me.
Please send me the Cudy wr3600 beta firmware. Moreover, could you please inform me when will be available the wisp mode firmware update?
@Dear Ruslan,
Our technical support has sent you the firmware via email. Please check.
“Dear Support,
Could you please be so kind and send me BETA FW with WISP support for WR3600E for my own risk?
Thanks,
Ruslan (menano@mail.ru)”