IP Reservation, is used to allocate a static IPv4 address to a MAC address.
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: Click Advanced Settings -> IP/MAC Binding in the Security section.
Step 3: Click Add to append one entry to the list. Select the device from the MAC-Address list and enter the IP address that you want to allocate. Enter a Comment for this entry optional.
Step 4: Save & Apply the settings.
Disconnect the device and connect again. Then you can check the IP address of the device if the IP Address you set.
Note: The IP Address and MAC Address of these entries also ARP bind.
12 comments
@Dear Petros,
Our technical support has contacted you via email. Please check.
“Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you”
Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you
@Dear Moses,
I don’t understand what do want to ask, please tell me more details about your question.
“How devices you bing using IP/MAC Adrress binding. Limitation of devices on network”
How devices you bing using IP/MAC Adrress binding. Limitation of devices on network
@PJJ Informatika,
Please refer to this article to set it. The router will allocate the IP address you set to the MAC address.
“How do you allocate a specific IP address to a device using its MAC address?
Regard PJJ Informatika”