Cudy Whole Home Mesh system is built to eliminate dead zones and to provide uninterrupted Wi-Fi throughout your home. This article will guide you to build a mesh system step by step.
Preparation:
1. Ensure you own at least 2 Cudy products.
2. All Cudy products support mesh technology: Home Mesh-Cudy official website
3. Firmware is up-to-date: Download Center
4. Take them in the same room during configuration.
5. Reset all your Cudy products to factory default settings. (With the Power on, press and hold the RESET button with a pin for 6s, then release.)
6. Set up your primary router and make it connect to the internet.
Here we take M1800 and WR2100 as examples:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: On the System Status page, click on the "+" button.
Step 3: Press the WPS button on the M1800 and then press the WPS button on WR2100.
Main mesh unit: Flash white
Add-on mesh unit: Flash white and red alternately
Step 4: It will go to "Scanning", then " Connecting".
Step 5: Wait until the System LED of the add-on router turns into solid blue, then relocate WR2100.
Step 6: Success and enjoy the mesh network.
Note:
1. 4/5G router can only be set up as a Main mesh unit. For example:
2. You will not able to log into the web interface of the add-on mesh router. If you want to change settings, please click on "System Status"->"Mesh".
71 comments
Hello, I have a BE3600 and a BE 6500 but i cant connect them with mesh, be3600 has the firmware updated but 6500 doesnt
@Dear Jarek,
Yes, but you need to update the firmware of your router. I will send you the firmware to email. Please check.
“Can I connect two routers WR6500H in mesh using the ethernet wired connection?
Can I connect two routers WR6500 in mesh using the ethernet wired connection?”
Can I connect two routers WR6500H in mesh using the ethernet wired connection?
Can I connect two routers WR6500 in mesh using the ethernet wired connection?
@Dear Piotr,
Sorry for the inconvenience caused to you. I just check it. It will be need about 1~2months to support satellite mesh function for WR11000.
“I bought 2 pcs of WR11000 and they don’t see each other in mesh mode. I see that You plan to add this functionality – but question is when – its a week or half year – because if its second option – I’m returning my routers to Amazon.”
I bought 2 pcs of WR11000 and they don’t see each other in mesh mode. I see that You plan to add this functionality – but question is when – its a week or half year – because if its second option – I’m returning my routers to Amazon.