1. Laden Sie die neueste Firmware vom Download Center herunter.
2. Entpacken Sie die heruntergeladene Datei
3. Schalten Sie das Cudy-Gerät ein und warten Sie, bis die LED dauerhaft leuchtet.
4. Stellen Sie über WLAN oder Ethernet eine Verbindung zum Cudy-Netzwerk her.
5. Öffnen Sie einen Webbrowser und gehen Sie zu http://cudy.net oder http://192.168.10.1 .
Weitere Informationen finden Sie unter Anleitung Wie melde ich mich bei der Weboberfläche von Cudy Router an?

6. Aktualisieren Sie die Firmware.
a. Erweiterte Einstellungen -> Firmware: Wählen Sie die Firmware aus, die Sie zum Hochladen entpackt haben.
b. Auf der Seite Allgemeine Einstellungen->Firmware können Online-Upgrades und lokale Updates durchgeführt werden.
Hinweis: Nur Firmware 2.x.x oder höher wird unterstützt.

7. Warten Sie 5 Minuten auf den Neustart des Routers.
129 Kommentare
r700 non funziona la messa offline e rimessa online delle wan basata su ping, Se si spegne il dispositivo collegato o si stacca il cavo funziona ma se semplicemente cade la connessione fttc o altro il r700 non capisce nulla. firmware 1.15.3. Forse con 1.15.5 hanno risolto? ma da dove si scarica che sul sito non c’è?
@Dear iMacOSX,
Please try to change a web browser and computer, then check if the problem fixed?
“I have the same problem.
“@Dear Milan,
Our technical support has sent you the solutions via email. Please check.
“i just purchased a WR1500 v1.0 and i cannot upgrade the firmware beyond the intermediate 1.0.4 , when i try to upgrade to the 2.3.x it is always giving an error that upgrade has failed. i need a solution please it cannot be that i am stuck with the old interface and with almost no advanced features , i have been trying forever and it is always failing no matter what firmware version i tried the only firmware i was able to upgrade was the old “intermediate-WR1500-L101-1.0.4-20241205-747393-mid-flash.bin”
if this will be case then a zero star and very bad review will be waiting for cudi products at every corner in the internet .””"
I have the same problem.
“@Dear Milan,
Our technical support has sent you the solutions via email. Please check.
“i just purchased a WR1500 v1.0 and i cannot upgrade the firmware beyond the intermediate 1.0.4 , when i try to upgrade to the 2.3.x it is always giving an error that upgrade has failed. i need a solution please it cannot be that i am stuck with the old interface and with almost no advanced features , i have been trying forever and it is always failing no matter what firmware version i tried the only firmware i was able to upgrade was the old “intermediate-WR1500-L101-1.0.4-20241205-747393-mid-flash.bin”
if this will be case then a zero star and very bad review will be waiting for cudi products at every corner in the internet .””
@Уважаемый Гетсу,
попробуйте сменить веб-браузер для настройки и обновления роутера. Рекомендую Chrome и Edge.
“Продали роутер cudy wr1500. Прошивка стоит 1.0.4. Хочу зайти в настройки роутера, но оказываюсь на стадии быстрой настройки. Прохожу, но вдруг на этапе 3/5 кнопка “далее” зависает и более не реагирует. Пробовал разные браузеры и т.д. – ноль эффекта. Сам интернет работает, но веб интерфейс нет. Прошить я его не могу, ибо кроме быстрой настройки в веб интерфейсе ничего нет. До этого был, я пытался обновить поочередно, но выдало ошибка invalid format file (делал все по найду). Да и если поставить прошивку промежуточную, то ничего не меняется. Проходит таймер, роутер отключается, мигает синим и ничего не происходит. Помогает только ресет”
Продали роутер cudy wr1500. Прошивка стоит 1.0.4. Хочу зайти в настройки роутера, но оказываюсь на стадии быстрой настройки. Прохожу, но вдруг на этапе 3/5 кнопка “далее” зависает и более не реагирует. Пробовал разные браузеры и т.д. – ноль эффекта. Сам интернет работает, но веб интерфейс нет. Прошить я его не могу, ибо кроме быстрой настройки в веб интерфейсе ничего нет. До этого был, я пытался обновить поочередно, но выдало ошибка invalid format file (делал все по найду). Да и если поставить прошивку промежуточную, то ничего не меняется. Проходит таймер, роутер отключается, мигает синим и ничего не происходит. Помогает только ресет