1. Laden Sie die neueste Firmware herunter vonDownload-CenterDie
2. Entpacken Sie die heruntergeladene Datei.
3. Schalten Sie das Cudy-Gerät ein und warten Sie, bis die LED dauerhaft leuchtet.
4. Stellen Sie über WLAN oder Ethernet eine Verbindung zum Netzwerk von Cudy her.
5. Öffnen Sie einen Webbrowser und gehen Sie zuhttp://cudy.netoderhttp://192.168.10.1.
Für weitere Einzelheiten sieheWie melde ich mich an der Weboberfläche des Cudy Routers an?
6. Aktualisieren Sie die Firmware.
A.Erweiterte Einstellungen -> FirmwareWählen Sie die Firmware aus, die Sie entpackt haben, um sie hochzuladen.
B.Allgemeine Einstellungen->FirmwareDie Seite kann Online-Upgrades und lokale Updates durchführen.
Notiz: Nur Firmware 2.x.x oder höher wird unterstützt.
7. Warten Sie 5 Minuten, bis der Router neu gestartet wurde.
189 Kommentare
@Dear Steve,
It is possible. But there is no other feedback about this issue. May be a compatible issue with specific terminal. We will try to test it. What is the brand and model of the terminal?
“Hi support team,
I confirm that past thursday I replaced the power adapter with a 12V 4A one, updated the firmware to version 2.4.25, and re-enabled 802.11ax on the Cudy P5 router. Interestingly, I noticed that today, after being active for 17 hours, the router restarted after having been up and running for 7 days the wifi config 802.11ac on 5Ghz band without any issues.
Therefore, I reconfigured 802.11ac on the 5GHz band and 802.11n on the 2.4GHz band on the Cudy router to see how the service behaves.
My question is, could this be related to a bug with 802.11ax on 5Ghz band?"
Hi support team,
I confirm that past thursday I replaced the power adapter with a 12V 4A one, updated the firmware to version 2.4.25, and re-enabled 802.11ax on the Cudy P5 router. Interestingly, I noticed that today, after being active for 17 hours, the router restarted after having been up and running for 7 days the wifi config 802.11ac on 5Ghz band without any issues.
Therefore, I reconfigured 802.11ac on the 5GHz band and 802.11n on the 2.4GHz band on the Cudy router to see how the service behaves.
My question is, could this be related to a bug with 802.11ax on 5Ghz band?
Reading the previous comments too, I’m almost certain that the intermediate file is to blame and is not accepted by the WR1500 v1.0 router.
I tried installing it via laptop and ethernet using Chrome or Explorer as the browser. The result was exactly the same.
Then I tried via WiFi with my Android mobile phone using Chrome or Opera.
Again the same results.
In the meantime, I have already updated easily on both the WR3000 and the WR3600 using the phone method without any hassle…
On the WR1500 v1.0 it simply does not work!
I believe that none of those commenting, managed to install the intermediate update.
@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.
“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”
Firmware EU 1.0 (Official .bin)