警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Can you please upload openwrt for WR3000 v2?
Hello.
I can’t find the intermediate firmware for upgrading to OpenWRT for the WR1300E v2.0.
Please help.
Did the update on one of my m3000 (SN M3000252600165) using the M3000 1.0_2.0.zip from here https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj
When well till the end and when it was performing the reset after a while it said that lost connection.
Now I cannot access it. The light is fixed white, I try to reset it only blinks white instead o the pink flashing light. Connecting directly to a laptop is not recognised. Laptop didn’t even recognise anything connected through cable.
How should I proceed?
Hello
The Cudy M3000 openwrt is connected to another router via the WAN port and configured as a dumb access point (wan/wan6 removed, ports added to br-lan, Firewall and DHCP disabled on LAN), but it does not work.
When a PC is connected to a LAN port on the Cudy M3000, it does not receive an IP address. If an IP address is set manually, there is still no internet access.
Please advise what additional configuration is required for the Cudy M3000 to operate correctly as a dumb AP when connected via the WAN port.
@Dear Mikhail,
Our technical support has sent you the firmware via email. Please check.
“Hello,
I have a Cudy AP3000 V1.0 access point, currently running firmware 2.4.6-20251023-141351.
I would like to safely upgrade the device to OpenWRT.
Could you please send the official intermediate firmware to my email: span530@gmail.com
?
Thank you!”