警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
@Dear Maxim,
Our technical support has sent you the firmware via email. Please check.
“Hello,
I requested the intermediate firmware for the TR3000 256MB FLASH V1.0 router with serial number SN: TR3000254700357. You emailed me the firmware file for the 128MB TR3000 V1.0 router. The TR3000 V1_20251118 .zip file is on your Google Drive: https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj?usp=sharing
Or is the intermediate firmware for 128 and 256 routers manufactured after week 47 the same? I need intermediate firmware for the TR3000 router 256MB FLASH V1.0 with serial number SN: TR3000254700357.”
Hello,
I requested the intermediate firmware for the TR3000 256MB FLASH V1.0 router with serial number SN: TR3000254700357. You emailed me the firmware file for the 128MB TR3000 V1.0 router. The TR3000 V1_20251118 .zip file is on your Google Drive: https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj?usp=sharing
Or is the intermediate firmware for 128 and 256 routers manufactured after week 47 the same? I need intermediate firmware for the TR3000 router 256MB FLASH V1.0 with serial number SN: TR3000254700357.
@Dear Maxim,
Our technical support has sent you the firmware via email. Please check.
“Hello,
I bought your router:
TR3000 V1.0
SN: TR3000254700357
Firmware Version: 24.21-20251009-115734
Model: TR3000_ZH v1.0
Hardware: TR3000 256MB FLASH V1.0
I want to install OpenWrt on it.
I know that version 128 has a memory chip change and uses a new intermediate firmware. The firmware for version 256 that I found contains an old file from May 21, 2025.
Could you please tell me where I can download the latest firmware for my router version (or the exact name on Google Drive, or please provide a link) and the correct version of OpenWrt so as not to damage the router?
Best regards,
Maxim"
understood :-)
i’ve created a fork of openwrt, added my changes and wrote a post in the openwrt forum:
https://forum.openwrt.org/t/new-device-support-cudy-lt300-v3-0/245463
to go ahead, i now need to install the firmware to figure out the missing peaces
@Dear wespe,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Hello,
thank you for offering this
please also add for the cudy LT300 3.0
this router looks simular to the LT400 and could be fairly easy to be added to openwrt
thank you”
Hello,
I bought your router:
TR3000 V1.0
SN: TR3000254700357
Firmware Version: 24.21-20251009-115734
Model: TR3000_ZH v1.0
Hardware: TR3000 256MB FLASH V1.0
I want to install OpenWrt on it.
I know that version 128 has a memory chip change and uses a new intermediate firmware. The firmware for version 256 that I found contains an old file from May 21, 2025.
Could you please tell me where I can download the latest firmware for my router version (or the exact name on Google Drive, or please provide a link) and the correct version of OpenWrt so as not to damage the router?
Best regards,
Maxim