警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Hi Cudy,
I accidently bought V2 of WR3000, expecting V1 to flash OpenWrt. While the router is cheap, I am now stuck with a device that could do a lot more if the official OpenWrt is supported!
What was the reason to stop supporting it? It is such a disappointment. Can’t you help the OpenWrt project to support V2 by telling them how you got your version working (which is clearly based on OpenWrt)?
Surely this will cost you potential customers to move away from Cudy? Myself included unfortunately, I will need to replace a functioning router :(
Hello. I can’t update, serial number WR3000S 2552. An error appears when trying to update. File is invalid. Please retry.
Uploaded File: cudy_wr3000s-v1-sysupgrade_20251119.bin
Size: 14.25 MB (14945872 B)
MD5: e7d613561bbf699ccf65ce41630219f5
Hw: WR3000H v1.0, fw: 2.4.5-20250515-105059
Dear Cudy Support Team,
A few days ago, I bought your router, connected it to the ONT, configured PPPoE and VLAN, and forwarded ports to be visible on torrent trackers.
To my surprise, the redirection does not work. Websites that check port openness (no matter which port I open) always show closed, fail, connection refused, etc.
Is it just me, or does this software version contain a bug that no one has noticed before?
Can I somehow install the official version of OpenWrt and check if that helps? Can you provide me with a specific link to the software and instructions on how to do it so that I don’t brick the router?
For clarity, I will add information about my environment:
- Debian 13 headless,
- Firewall on the host disabled,
- DMZ, regardless of whether it is enabled or disabled, does not work,
- UPnP changes nothing,
- I am not behind CGNAT.
Hello Cudy team!
Is OpenWRT support planned for the M3600 and WR6500/H devices? I’m really looking forward to the firmware for them
Please send AP3000 intermediate firmware (Realtek PHY, not Motorcomm). Thank you.