OpenWrt 軟體下載

警告

本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。

描述

  1. 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
  2. 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
  3. 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。

保固：

Cudy特此聲明

  1. 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
  2. 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
  3. 如果您需要使用openwrt軟體，建議您從Cudy官網下載。

下載 OpenWrt 韌體以刪除簽名檢查：驅動程式

OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器 

返回網誌

1319 則留言

@Martin,
Our technical support has sent you the intermediate firmware via email. Please check.

“I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks”

Support Cudy

@Pavel，
Уважаемый клиент,
Благодарим вас за обращение в службу поддержки Cudy.
Прошивка OpenWrt не разрабатывается компанией Cudy. Сначала нам нужна официальная поддержка маршрутизатора на форуме OpenWrt, затем мы можем выпустить для вас промежуточную прошивку, после чего вы сможете использовать и обновлять ее до другой прошивки OpenWrt. Спасибо!

“Добрый день, нужна прошивка OpenWrt для CUDY LT500D, можете выслать? Либо прошивка для разблокировки подписи, чтоб попробовать собрать свой OpenWRT.”

Support Cudy

If you could release the OpenWRT initial firmware for the M3000 V2 it would be great. I was looking for the M3000 in white and ended up by buying 2xPack M3000 V2 (White ones) without noticing these are actually not equal in terms of hardware to the M3000 V1 (Black ones)

Hugo Freitas

File is invalid. Please retry.
Uploaded File: openwrt-24.10.1-ramips-mt7621-cudy_wr1300-v3-squashfs-sysupgrade.bin
Size: 7.25 MB (7602797 B)
MD5: f7192538cfeeb661bac625306f170cda

Firmware Version
2.3.9-20250208-115514

Hardware
WR1300 V3.0

What’s the problem?

Alex

Dear All,
It works now.
Device seem bricked after flashing the Cudy (signature free) firmware from G Drive. After that giving a static ip (eg 192.168.1.5) to myself, trying to ping 192.168.1.1 and it didn’t work, thus I was thinking something was wrong during the flash. But my eth cable was plugged in the whole time.
Just for once, I unplugged and replugged it after the flashing. It worked! It was then able to ping the device.
And after I flashed the Openwrt again from within the gui.
Thanks to Cudy Support and all other people for all the replies below.

Niqqi

發表留言