Cudy Software Platform Updates

Cudy 软件平台升级介绍

介绍

本文列出了Cudy软件平台(CSP)从2.3到2.5版本的最新及历史更新。它概述了新引入的功能及其支持的Cudy型号。

欢迎你在这篇文章下留下评论并建议新功能。我们很乐意了解你的想法,并优先考虑最受广泛要求以及最具有独特性的建议,并将其纳入我们的研发计划。

CSP 2.5

发布时间

自2026年1月起

支持计划(按优先排序)

WR3000 1. 0、WR3000 2.0、WR3000S 1.0、WR3000E 1.0、TR3000 1.0、WR11000 1.0、WR6500 1.0、WR6500H 1.0、WR3600 1.0、WR3600E 1.0、WR3600H 1.0、M11000 1.0、M3600 1.0、WR1300 3.0/4.0、WR1200E 1.0、WR1200 2.0/2.1、M1300 3.0、M1200 1.0、P4 1.0、LT700 2.0、LT500 3.0、LT500D 3.0、LT300 V3.0、LT700 Outdoor 2.0、LT500 Outdoor 2.0

你可能不会立即收到升级,因为不同型号的更新计划不同。

功能

功能
支持的设备
页面截图
显示Mesh拓扑
在网状详情页面显示Mesh设备之间的连接拓扑(客户端设备不会显示)
Cudy Mesh 兼容型号
选择Mesh回传方式
卫星网状设备可配置为仅在有线回程模式下运行
这有助于防止可能的环路:当多个Cudy接入点由PoE交换机供电,且PoE交换机开关时,一些接入点可能会建立无线回程,并从LAN端口提供网络,导致类似拓扑交换机1 -- AP1 ))(AP2 -- switch1
Cudy Mesh 兼容型号
-
选择Mesh回传设备
Mesh子节点设备现在允许扫描附近的网状节点,并选择特定节点进行连接。当已选定节点在未来无法连接时,它将切换为自动选择。
Cudy Mesh 兼容型号
多个VPN服务器
支持同时启用多个不同协议的VPN服务器。
(IPsec 和 Zerotier 不能与其他 VPN 同时启用)
所有 Wi-Fi 路由器 / 全屋路由型号
(不包括支持 8MB 闪存的型号)

多个VPN客户端配置
支持配置多个VPN客户端,但一次只能启用一个。
(IPsec 和 Zerotier 不能与其他 VPN 同时启用)
所有 Wi-Fi 路由器 / 全屋路由型号
(不包括支持 8MB 闪存的型号)
L2TP/PPTP 支持多个账户
L2TP/PPTP VPN 服务器支持配置多个账户
所有 Wi-Fi 路由器 / 全屋路由型号
(不包括支持 8MB 闪存的型号)
VPN配置迁移
支持备份VPN配置并在其他设备上恢复,允许不同设备型号间的配置恢复。仅支持将所有VPN迁移在一起。
所有 Wi-Fi 路由器 / 全屋路由型号
(不包括支持 8MB 闪存的型号)
全局默认限速
QoS 增加了默认速率限制设置,所有客户端都受默认速率限制
Wi-Fi 路由器
访客网络速度限制
支持设置整个访客网络的上行和下行带宽
Wi-Fi 路由器
新固件提醒
当检测到新固件时,进入配置页面时页面会弹出新固件升级提醒
所有型号
-

手动执行WoL
局域网唤醒改为手动执行
所有型号
(部分低端型号不具备此功能)
DHCP 可选网关配置
以允许在被用作旁路由状态下开启DHCP为设备分配IP地址,并将网关指向正确主路由网关设备。
所有 Wi-Fi 路由器/网状系统型号
账户注销
支持账户注销
所有型号
-
OpenVPN 速度提升
支持 OpenVPN DCO 技术,提升 OpenVPN 的最大上传和下载速度
MTK AX3000 型号,包括
WR3000 1.0
WR3000S 1.0
WR3000E 1.0
TR3000 1.0
-
在快速设置时显示 IPTV 设置
快速设置中的高级功能中默认展示 IPTV 菜单
所有 Wi-Fi 路由器 / 全屋路由型号
菜单输入位置调整
调整通用设置菜单和高级设置菜单:
将IPTV/VLAN和访客网络的条目移入“通用设置”;
将“强制门户认证”的入口移到高级设置中
所有型号

无障碍功能
添加无障碍功能并支持对比度调节
所有型号

WPS开关
添加WPS交换机
所有型号

数据包捕获
在诊断工具中添加数据包捕获功能
所有 Wi-Fi 路由器 / 全屋路由型号
(不包括支持 8MB 闪存的型号)
DoH
添加 DNS over HTTPS 模式以实现更安全的自定义 DNS

所有 Wi-Fi 路由器/网状系统型号
(不包括支持 8MB 闪存的型号)

TW 区域代码
新增对中国台湾地区TW代码的支持,2.4G频道1-11,5G频道1、2和4频段
所有型号
-
TW IPTV
添加IPTV中国台湾地区CHT模式

所有 Wi-Fi 路由器/网状系统型号

DNS 在线检测
在线检测功能增加了DNS协议检测方法
所有 Wi-Fi 路由器/网状系统型号
-

CSP 2.4

发布时间

首次于2025年4月28日在WR3000发布

主要职能

功能
支持的设备
页面截图
兼容 APP 1.3
所有无线设备
参见 APP 1.3 功能
优化EAEU翻译
所有无线设备

CSP 2.3

发布时间

首次于2024年12月31日在AP1300D发布

主要功能

功能
支持的设备
页面截图
多SSID
支持配置多个SSID
AP 
强制门户登录
手机连接Wi-Fi后,认证页面会自动弹出,访问互联网需要认证
支持自定义认证页面内容,如背景图片、标志、字体颜色和服务条款。
支持的认证方法包括:1)一键认证;2)密码输入认证
AP
USB Tethering 网络
控制USB接口是否支持网络共享。启用后,该设备可用于扩展手机或便携式Wi-Fi的无线网络
带USB端口的设备,如TR3000
Wi-Fi 开关控制
打开后面板AP上的硬件按钮,可以同时控制LED和Wi-Fi的开关。此时,通过软件切换LED也会触发Wi-Fi的同步开关。
墙面AP

PoE 送电控制
控制面板的AP端口是否能外部供电(仅在 802.at 电源接收下可用,默认关闭)
墙面AP

 

返回博客

45 条评论

LT300性價比非常高,希望可以在功能面上增加SMS 收發功能,因為在Mercusys 水星 MB110-4G是有的。希望可以成真!

Lin

Hi,
I would like to report significant stability issues with the latest Firmware 2.5.0 for the Cudy M3000 V1, I’ve been using the M3000 for more than a year, but with latest update the devices are stuck loading websites.
I did simple testing using wireshark and concluded that the issue is from the ipv6, if I have it enabled on the device, the issue happens. but theres no way to disable ipv6 in the M3000 settings
Hope you can help

Nadeem

@Dear Darkxeno,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.

“Waiting impatiently to see this last huge update coming to my WR3000S. Thank you Cudy for all this great work.

Just one small feedback so far, have you considered improving the scheduled power on / off of the Wifi, by allowing to select the affected ssid? (2.4g or 5g)

My use case is: i have this router on my little daughter’s dorm, and i want to make use of this scheduled power off feature to disable only the 5g network during the nights, unfortunately i can’t disable the 2.4g too because that power s all my IOT devices on the area.

Reducing the amount of waves during the night is feature that many parents desire but in my case the complete WIFI shutdown is not an option.
Very very thanks."

Support

Waiting impatiently to see this last huge update coming to my WR3000S. Thank you Cudy for all this great work.

Just one small feedback so far, have you considered improving the scheduled power on / off of the Wifi, by allowing to select the affected ssid? (2.4g or 5g)

My use case is: i have this router on my little daughter’s dorm, and i want to make use of this scheduled power off feature to disable only the 5g network during the nights, unfortunately i can’t disable the 2.4g too because that power s all my IOT devices on the area.

Reducing the amount of waves during the night is feature that many parents desire but in my case the complete WIFI shutdown is not an option.

Very very thanks.

darkxeno

@Dear xuewd,
您的建议我们已经转达给负责产品功能规划的产品经理。
“是否可以增加一个对在线设备的流量统计功能呢?”

Support

发表评论