只有升级到支持Cudy APP管理的固件版本的Cudy路由器才可以使用APP进行管理。
因此，您的Cudy路由器很有可能尚未升级到支持APP管理的固件版本。
您可以通过扫描下方二维码下载Cudy APP。
请下载最新固件版本进行升级。
型号：Cudy 无线产品将陆续发布新固件支持 APP 管理，下表列出部分已支持 APP 的产品型号，其他型号可能已发布，请前往下载中心查看新固件。
| WR1300 V2 和 V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
注意：所有固件版本为2.xx的Cudy路由器均支持Cudy APP管理。
如果您在使用Cudy APP过程中有任何问题或建议请点击这里进行反馈。
41 条评论
Cuando actualizo el enrutador WR1500 de la versión 1.0.4-20241017-804431 a la última versión, solo parpadea y nunca se apaga, solo cuando lo desconecto de la electricidad.
@Dear Franz,
Thank you for you feedback. We will follow the issues.
“I tried the WR3000e with WISP and it was possible to rename the clients.
Now I have changed to access point mode and mesh but the app does not allow to change the name.
If you have a lot of smart home devices, you dont know which one is it.
Why is this in AP Mode not possible?
By the way, in WISP Mode it was not possible to change the channels , even the 2.4 GHz which was not used for the WISP bridge. In AP Mode it is possible."
I tried the WR3000e with WISP and it was possible to rename the clients.
Now I have changed to access point mode and mesh but the app does not allow to change the name.
If you have a lot of smart home devices, you dont know which one is it.
Why is this in AP Mode not possible?
By the way, in WISP Mode it was not possible to change the channels , even the 2.4 GHz which was not used for the WISP bridge. In AP Mode it is possible.
Dear Ahmad,
Our technical support has sent you the solutions via email. Please check.
“When I update the WR1500 router from version 1.0.4-20241017-804431 to the latest version, it only flashes and never turns off, only when I unplug it from the electricity.””
When I update the WR1500 router from version 1.0.4-20241017-804431 to the latest version, it only flashes and never turns off, only when I unplug it from the electricity.”