警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1310 条评论
Hello,
I have a Cudy AP3000 V1.0 access point, currently running firmware 2.4.6-20251023-141351.
I would like to safely upgrade the device to OpenWRT.
Could you please send the official intermediate firmware to my email: my_spy_mail@mail.ru ?
Файл не совместим с моделью устройства.
Загруженный файл: cudy_ap3000wall-v1-sysupgrade_20251119.bin
Размер: 14.25 MB (14945878 B)
MD5: 376d404fd1535cc51168e365e2374427
SN: AP3000_P251600697
Thank you!
Can you please upload openwrt for WR3000 v2?
Hello.
I can’t find the intermediate firmware for upgrading to OpenWRT for the WR1300E v2.0.
Please help.
Did the update on one of my m3000 (SN M3000252600165) using the M3000 1.0_2.0.zip from here https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj
When well till the end and when it was performing the reset after a while it said that lost connection.
Now I cannot access it. The light is fixed white, I try to reset it only blinks white instead o the pink flashing light. Connecting directly to a laptop is not recognised. Laptop didn’t even recognise anything connected through cable.
How should I proceed?
Hello
The Cudy M3000 openwrt is connected to another router via the WAN port and configured as a dumb access point (wan/wan6 removed, ports added to br-lan, Firewall and DHCP disabled on LAN), but it does not work.
When a PC is connected to a LAN port on the Cudy M3000, it does not receive an IP address. If an IP address is set manually, there is still no internet access.
Please advise what additional configuration is required for the Cudy M3000 to operate correctly as a dumb AP when connected via the WAN port.