OpenWrt软件下载

警告

本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。

描述

  1. 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
  2. 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
  3. 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。

保修单：

Cudy 特此声明

  1. 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
  2. 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
  3. 如果您需要使用openwrt软件，建议您从Cudy官网下载。

下载OpenWrt固件删除签名检查： 驱动器

OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器

返回博客

1309 条评论

нет прошивки на WBR3000UAX. где её можно скачать ?

Андрей

Hi Jaddie, even going back to 2.0.0 did not work here. Still getting the file is invalid message. A 2nd hand Aruba is on its way to me now, if it works then there will be some Cudy kit going on eBay!

Jon

Jon Fear

I have two Cudy M1800 with firmware version 2.1.3-20240509-102323. I tried to use the file in M1800+V2.zip. However, it says “Not applicable！Please upload the firmware applicable to the following models.” if I try to update firmware from Advance Settings → Firmware. If I try to update the firmware of a specific model, it says “File is invalid. Please retry.”. I have tried downgrading the firmware version of the M1800 devices to 1.16.14-20231117-190903. It gives the same error. What should I do?

Muhammed Tasnim Bin Anwar

@Support & @Jon
That seems to be working, Jon if you follow the 2nd link they gave, there is a 2nd place to update the firmware which works, the normal one errored for me too, but doing it where the 2nd guide shows it is now rolling back to v2.0.0 at which point openwrt should install

Jaddie

Following the openwrt saga. I have several M3000 v1 units and cannot load ANY openwrt file, even with original FW back to 2.0.0. This is very frustrating and I am openly thinking about replacing the whole system (4x M3000, 1x AP3000 Out)… I need separate wireless networks and being limited to 2.4 and 5 is useless… I need a separate 2.4 network for IOT as well as a separate 5 network for IOT, a merged 2.4/5 for everything else and then a guest network…

Jon Fear

发表评论