警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
Версия прошивки
2.4.19-20250828-192837
Аппаратная версия
WR3000 V1.0 SN:WR3000254901313 EAEU1.0
@Dear Паве,
Please check the model and Firmware page and send it to me again. I think you offer the wrong modle. Or you can send me the full SN number and send it to us for checking.
“Dear Cudy Support,
I am trying to install OpenWrt on my WR3000E V1.0 router but encountering an issue.
Device information:
- Model: WR3000E V1.0
- Serial Number: 2549XXXXX (new revision with NAND flash F50L1G41LC, SN ≥ 2543)
- Current firmware: 2.4.19-20250828-192837
Problem:
I downloaded the file “cudy_wr3000e-v1-sysupgrade_20251119.bin” (MD5: 249c150e7676facc9f33d79e634ec4a3) but the router rejects it with “Invalid file” error.
I understand that routers with SN ≥ 2543 require a special intermediary firmware compatible with the new flash chip (post-November 2025). The file dated 2025-11-19 appears to be for older revisions only.
Could you please provide the correct intermediary firmware for WR3000E V1.0 with new flash (SN 2549)?
Thank you for your assistance.
Best regards, Pavel"
Dear Cudy Support,
I am trying to install OpenWrt on my WR3000E V1.0 router but encountering an issue.
Device information:
- Model: WR3000E V1.0
- Serial Number: 2549XXXXX (new revision with NAND flash F50L1G41LC, SN ≥ 2543)
- Current firmware: 2.4.19-20250828-192837
Problem:
I downloaded the file “cudy_wr3000e-v1-sysupgrade_20251119.bin” (MD5: 249c150e7676facc9f33d79e634ec4a3) but the router rejects it with “Invalid file” error.
I understand that routers with SN ≥ 2543 require a special intermediary firmware compatible with the new flash chip (post-November 2025). The file dated 2025-11-19 appears to be for older revisions only.
Could you please provide the correct intermediary firmware for WR3000E V1.0 with new flash (SN 2549)?
Thank you for your assistance.
Best regards, Pavel
@Dear ahmed,
You router is WR3000, not WR3000E. I have sent you the correct firmware.
““Dear Cudy Support Team,
Doesn’t work
File is invalid. Please retry.
Uploaded File: cudy_wr3000e-v1-sysupgrade.bin
Size: 12.63 MB (13241931 B)
MD5: 77e6d84f93081732d4c130521078991a
@Dear Ahmed Elbiomy,
Our technical support has sent you the firmware via email. Please check.
“Dear Cudy Support Team,
I am writing to request the correct intermediate firmware file needed to install OpenWrt on my router.
My router details are:
· Model: Cudy WR3000E
· Hardware Version: v1.0
· Current Firmware Version: 2.2.6-20240902-033948
I have tried several intermediate files, but they were rejected. Could you please provide me with the correct intermediate firmware file compatible with my current firmware version?
Thank you for your assistance.""
Dear CUDY support! Earlier, with your help, I updated my AP3000 v1 to openwrt. Now I need to revert to the factory software. The LUCI web interface complains about an invalid file, and holding down the reset button and supplying power doesn’t work either. Can you help me figure out what to do?