警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
Dear Cudy Support team!
Can I get firmware for install Openwrt on my router:
Model: WR3000E V2.0
Current Firmware: 2.4.18-20251124-103954
Маршрутизатор WR300 V1.0 SN:WR30002549
Прошивка 2.4.19-20250828-192837
Аппаратная версия WR3000 V1.0
Прошивка которая для WR3000 V1.0 на гугл диске не подходит. Выдает ошибку.
Просьба выслать прошивку по электронной почте
@Dear Dan,
Do you remember what is firmware version before update to the OpenWrt firmware? If it was 2.4.7, you can recover it via the TFTPD tool. Please refer to this article.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=b2bfff253&ss=r
If other firmware version, please keep using the OpenWrt firmware. Can not be recovered.
“Dear Cudy support team,
I am trying to restore the factory firmware after OpenWrt on AP3000 V1.0, but I am facing a problem.
Device information:
- Model: AP3000 V1.0
- Serial number: AP3000_P251600697 EU1.0
- Current firmware: OpenWrt 25.12.0
The problem is:
When trying to flash through the openwrt web interface (without saving the settings):
I downloaded the file “AP3000-R49-2.4.7-20260115-152710-sysupgrade.bin”, but the router rejects it with the error “Invalid file”.
According to the instructions for returning: Connected directly to a PC with IP:192.168.1.10, holding reset
Connected the power. But in this case, I can’t connect to the router. The special interface for specifying the firmware file doesn’t open at the address 192.168.1.1.
For the OpenWrt firmware, you provided a special firmware for the transition. I understand that you also need a special version to return to the factory firmware.
Please help me return to the factory firmware.
Thank you for your assistance. Best regards, Dan
"
@Dear Александр,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
For WR3000 V2.0, it is impossible to develop the OpenWrt firmware currently.
“Please tell me when the OpenWRT firmware for WR3000 V2.0 will be available.”
@Dear Андрей,
I just uploaded the intermediate firmware for WR1300S V1.0 to the Google Drive. You can download it.
“When will there be an openwrt for WR1300S ? The kernel and sysupgrade were previously sent”