警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of M1300 now?
@Shawon
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of M1300 now?
“Could you kindly pleeease add openwrt software for Cudy M1300 on the list.
It will be very helpful.
Thank you.”
@Kasey,
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of WR3000E now?
“Is it possible to add an image to unlock the WR3000E? I see the normal WR3000 already has one, but it of course does not work. I’d like to begin work on porting OpenWRT to this device.”
Is it possible to add an image to unlock the WR3000E? I see the normal WR3000 already has one, but it of course does not work. I’d like to begin work on porting OpenWRT to this device.
Could you kindly pleeease add openwrt software for Cudy M1300 on the list.
It will be very helpful.
Thank you.
@Marek,
OK,I have forwarded you request to our R&D team. Please wait patiently for the intermediate firmware.
“It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.”