警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
@Martin,
Our technical support has sent you the intermediate firmware via email. Please check.
“I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks”
@Pavel，
Уважаемый клиент,
Благодарим вас за обращение в службу поддержки Cudy.
Прошивка OpenWrt не разрабатывается компанией Cudy. Сначала нам нужна официальная поддержка маршрутизатора на форуме OpenWrt, затем мы можем выпустить для вас промежуточную прошивку, после чего вы сможете использовать и обновлять ее до другой прошивки OpenWrt. Спасибо!
“Добрый день, нужна прошивка OpenWrt для CUDY LT500D, можете выслать? Либо прошивка для разблокировки подписи, чтоб попробовать собрать свой OpenWRT.”
If you could release the OpenWRT initial firmware for the M3000 V2 it would be great. I was looking for the M3000 in white and ended up by buying 2xPack M3000 V2 (White ones) without noticing these are actually not equal in terms of hardware to the M3000 V1 (Black ones)
File is invalid. Please retry.
Uploaded File: openwrt-24.10.1-ramips-mt7621-cudy_wr1300-v3-squashfs-sysupgrade.bin
Size: 7.25 MB (7602797 B)
MD5: f7192538cfeeb661bac625306f170cda
Firmware Version
2.3.9-20250208-115514
Hardware
WR1300 V3.0
What’s the problem?
Dear All,
It works now.
Device seem bricked after flashing the Cudy (signature free) firmware from G Drive. After that giving a static ip (eg 192.168.1.5) to myself, trying to ping 192.168.1.1 and it didn’t work, thus I was thinking something was wrong during the flash. But my eth cable was plugged in the whole time.
Just for once, I unplugged and replugged it after the flashing. It worked! It was then able to ping the device.
And after I flashed the Openwrt again from within the gui.
Thanks to Cudy Support and all other people for all the replies below.