OpenWrt软件下载

警告

本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。

描述

  1. 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
  2. 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
  3. 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。

保修单：

Cudy 特此声明

  1. 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
  2. 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
  3. 如果您需要使用openwrt软件，建议您从Cudy官网下载。

下载OpenWrt固件删除签名检查： 驱动器

OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器

返回博客

1312 条评论

Hello Cudy team!
As many others did already, I am requesting instructions for unlocking / removing signature in order to flash OpenWrt on my AP3000 v1. Thanks!

John Digweed

Hi, can I hava Openwrt firmware for cudy ap3000 v1 (not outdoor), please?

thank you,

Mikas

Mikas Vengris

I don’t see an OpenWRT firmware for the AP3000 v1, I’ve attempted to use the firmware from OpenWRT directly, but it appears that they will not load due to missing signature. Any assistance is appreciated.

Chris

@Dear Kamil,
I think the firmware you downloaded is correct. Or you can’t upload it. So I suggest you to check if your computer’s IP address is obtained via DHCP? If not, please set it to DHCP. Because the manage IP address has been changed from 192.168.10.1 to 192.168.1.1. You need to login the web page of the router via new IP address.

“Hello Support Team,
I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:
Firmware Source: I downloaded the firmware file from a Google Drive link.
Upload Method: Web management interface, Firmware Upgrade section.
Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.
Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.
Could you please advise on:
Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.
Thank you for your assistance.
Best regards,
Kamil”

Support

Hello Support Team,

I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:

Firmware Source: I downloaded the firmware file from a Google Drive link.

Upload Method: Web management interface, Firmware Upgrade section.

Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.

Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.

Could you please advise on:

Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.

Thank you for your assistance.
Best regards,
Kamil

Kamil

发表评论