警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1449 条评论
@Dear Dmigorg,
Our technical support has contacted you via email. Please check.
“Hello Cudy Support,
Could you please provide a signed OpenWrt intermediate/transition firmware for the Cudy LT700E V1.0, board ID R55?
My device is currently running the official firmware:
LT700E-R55-1.90.0-20240322-120922
I would like to migrate safely from the stock Cudy firmware to OpenWrt using the normal firmware upgrade procedure.
I noticed that signed intermediate OpenWrt firmware is available for several other Cudy models, including the LT700 Outdoor V1.0 (R43). However, my device is the LT700E V1.0 (R55), so the R43 firmware is not compatible.
Could you please provide the corresponding signed intermediate firmware for LT700E V1.0 / R55, or let me know if there is another officially supported method to install OpenWrt on this model?
Thank you!"
Hello,
I have a Cudy WR3000 V1.0.
Serial number starts with: 2549
Current stock firmware: 2.4.19-20250828-192837
I want to install official OpenWrt.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0.
Thank you.
Hi all,
I have a Cudy AX 3000 (Model M3000 V2).
Current Stock Firmware 2.5.28-20260807-120317
PLEASE, send me the newest updated Cudy-signed OpenWrt intermediate firmware.
Thanks
Sasa
Hello,
I have a Cudy WR3000U-256MB V1.0 router.
SN: S000130126220 EAEU1.0
Current firmware: 2.4.29-20260427-104733
I tried installing official OpenWrt following the standard process:
1. Installed the intermediate firmware cudy_wr3000u-256-v1-sysupgrade.bin from your Google Drive folder — successful.
2. Attempted to flash the official OpenWrt 25.12.5 image for “Cudy WR3000 v1” (device profile cudy,wr3000-v1) from firmware-selector.openwrt.org.
I received this error:
“Device cudy,wr3000u-v1 not supported by this image. Supported devices: cudy,wr3000-v1”
It appears the intermediate firmware identifies my device under a separate profile “cudy,wr3000u-v1” (with a U), while the official OpenWrt image is built for a different profile “cudy,wr3000-v1” (without the U).
Questions:
1. Does my unit’s batch use a different flash memory chip requiring a separate device profile?
2. Is there already a compatible OpenWrt image for the cudy,wr3000u-v1 profile, and where can I download it?
3. If not yet available, when is it expected to be released?
I did not force the flash and safely restored the router to stock firmware via TFTP recovery to avoid damaging the device. The router is currently fully functional on stock firmware.
Thank you for your help.
Hello.
I have a Cudy WR3000H V1.0.
Serial number: S000160126…
Current stock firmware: 2.4.5-20250515-105059
I want to install official OpenWrt. Please send the compatible Cudy-signed intermediate firmware to the email address provided with this comment.
Thank you.