常见网络拓扑：
步骤 1：将范围扩展器插入墙上插座，等待电源灯稳定亮起。
笔记：
1. 当您设置范围扩展器时，请将其靠近主机路由器。
2. 将范围扩展器重置为默认设置以避免接口。
第 2 步：连接到 Range Extender 的默认 Wi-Fi，即开放的 Wi-Fi。
步骤 3 ：启动网络浏览器，在地址栏中输入http://cudyre.net/或http://192.168.10.254/ 。
弹出如下登录页面，选择网页管理页面的显示语言，要求密码为“ admin ”或者需要创建一个密码。
步骤 4：将弹出快速设置窗口，选择“无线扩展器” ，然后转到“下一步” 。
第 5 步：选择您的“时区”。
步骤6：选择要扩展的主机网络。单击“连接” 。
第七步：输入主路由器的无线密码。
注意：请确保输入的无线密码正确，否则配置无法成功。
第八步：自定义WiFi名称（SSID），密码与您的主机网络相同。
步骤9：单击“保存并应用”完成配置。
第十步：将您的无线设备重新连接到新的 Wi-Fi 网络。
笔记：
配置完成后，分配的 IP 地址将不再是 192.168.10.254。要再次登录 Cudy Extender，请访问“http://cudyre.net”或在路由器的客户端列表中查找 IP 地址。
18 条评论
@Dear Greg,
Our technical support has sent you the solutions via email. Please check.
“My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?”
My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?
Bardzo dziękuję
I have AC1200 Cudy Extenders (3 pack) The master Extender is working but the other two which are positioned away from the Master and the Fritz Box Router have stopped working.
I have reset them to factory settings many times and tried to re pair them with the master by pressing the button on the back of the extender for 1 second and then pressing the button on the back of the Master Cudy for 1 second. The lights are flashing on both but the light on the Master returns to solid white/blue after about 2 minutes while the light on the extender changes to Solid Red, I also purchased a new extender but the same thing happens when I try to pair, therefore I don’t think the original 2 extenders are damaged but why will they not pair with the master.
i can not follow how to do this online, is there someone who can help me through the steps required?? Thank you.
@Dear Rue,
1. Please try to reset the Extender to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes. Then reinstall the Extender and check if the problem remains？
2. You can try to update the latest firmware of your Extender and check again. You can download the firmware on the link.
https://www.cudy.com/en-us/pages/download-center/search
“My exteneder just flash light and then turns off and dose not show the word mange router as usual and when i link it to the router the lock light is the only bright light”