Cudy Whole Home Mesh 系统旨在消除死角，并为您的整个家庭提供不间断的 Wi-Fi。本文将指导您逐步构建网状系统。
准备：
1. 确保您拥有至少 2 件 Cudy 产品。
2.Cudy所有产品均支持mesh技术：首页Mesh-Cudy官网
3. 固件已更新：下载中心
4. 配置时将它们放在同一个房间。
5. 将所有 Cudy 产品重置为出厂默认设置。（打开电源后，用别针按住 RESET 按钮 6 秒钟，然后松开。）
6. 设置您的主路由器并使其连接到互联网。
这里我们以M1800和WR2100为例：
步骤 1 ：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：在系统状态页面，单击“+”按钮。
步骤 3 ：按下 M1800 上的 WPS 按钮，然后按下 WR2100 上的 WPS 按钮。
主网单元：闪光白
附加网格单元：白色和红色交替闪烁
步骤 4：它将进入“扫描”，然后进入“连接”。
步骤 5 ：等到附加路由器的系统 LED 变为常亮蓝色，然后重新定位 WR2100。
步骤 6 ：成功并享受网状网络。
笔记：
1. 4/5G 路由器只能设置为主网状单元。例如：
2. 您将无法登录附加网状路由器的 Web 界面。如果您要更改设置，请点击“系统状态”->“ Mesh ”。
90 条评论
I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.
@Julos
Dear Customer，
Thank you for contacting Cudy support team.
Yes, you can. Please reset the WR1300 to factory default. Then connect the WAN port of the WR1300 to the LAN port of the LT12 via cable. The mesh system will installed automatically.
“Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks"
Can I connect the LT12 and WR1300 in mesh using the ethernet wired connection?
Thanks
@Xavier，
Dear Customer,
We have developed new firmware of WR1500 like other Cudy routers. It will be very easy to install Cudy mesh as the instruction on this article. I have sent you the firmware and instruction via email. Please refer to the instruction attached to update the firmware then reinstall the router and install mesh with them.
“I have 2 wr1500 routers running with the last firmware, both have de easymesh option, I want to connect them in a mesh network, but the interface is so diferent that the showed here, please help me to connect them properly to have a mesh network. Thanks”
I have 2 wr1500 routers running with the last firmware, both have de easymesh option, I want to connect them in a mesh network, but the interface is so diferent that the showed here, please help me to connect them properly to have a mesh network. Thanks