Cudy Whole Home Mesh 系统旨在消除死角，并为您的整个家庭提供不间断的 Wi-Fi。本文将指导您逐步构建网状系统。
准备：
1. 确保您拥有至少 2 件 Cudy 产品。
2.Cudy所有产品均支持mesh技术：首页Mesh-Cudy官网
3. 固件已更新：下载中心
4. 配置时将它们放在同一个房间。
5. 将所有 Cudy 产品重置为出厂默认设置。（打开电源后，用别针按住 RESET 按钮 6 秒钟，然后松开。）
6. 设置您的主路由器并使其连接到互联网。
这里我们以M1800和WR2100为例：
步骤 1 ：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：在系统状态页面，单击“+”按钮。
步骤 3 ：按下 M1800 上的 WPS 按钮，然后按下 WR2100 上的 WPS 按钮。
主网单元：闪光白
附加网格单元：白色和红色交替闪烁
步骤 4：它将进入“扫描”，然后进入“连接”。
步骤 5 ：等到附加路由器的系统 LED 变为常亮蓝色，然后重新定位 WR2100。
步骤 6 ：成功并享受网状网络。
笔记：
1. 4/5G 路由器只能设置为主网状单元。例如：
2. 您将无法登录附加网状路由器的 Web 界面。如果您要更改设置，请点击“系统状态”->“ Mesh ”。
83 条评论
Hello, how many Cudy M3000 V2 AX3000 V2.0 https://www.cudy.com/products/m3000-2-0 can be used in a Mesh environment? Is there any threshold to signal strength (RSSI). Thanks, Tahseen
I have m3000 cudy mesh units i don’t know if version 1 ore 2.
5ghz working perfect but 2.4 mhz the network is sometimes found and connect but no internet connection. i have the latest firmware 2.3.8 on al 3 cudy’s
My wife get angry every time because no connection on phone and switching off wifi
I want to know if i buy 3x WR3000, if i can use them in MESH mode?
@Bruno,
Dear Bruno,
LT500 can only work as main mesh router. Can’t work as satellite mesh router. So you can’t install mesh system with them. Please return it and buy a new Cudy Wireless router,such as WR1300 to install mesh system.
“Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(”
Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(