VPN客户端是用于在用户和VPN服务器之间建立安全连接的终端设备或软件。
什么是 VPN？
VPN（虚拟专用网络）利用隧道技术帮助您远程、安全且私密地访问互联网资源。当您使用互联网时，VPN 会加密您的个人信息并向公众隐藏您的 IP 地址。对于 VPN 用户来说，这就像计算机直接相互连接一样。
常见网络拓扑：
这里我们以WR2100作为演示。
步骤 1：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：点击常规设置-> VPN并启用VPN 。
默认规则：允许所有设备或禁止所有设备使用 VPN。
要指定设备，请单击系统状态->设备-> VPN来启用或禁用它。
站点到站点：允许两个站点中的设备相互通信。
VPN 政策：
禁用：无需其他设置。
VPN 终止开关：当 VPN 连接丢失时关闭互联网连接。
域：指定哪些域通过 VPN，哪些不通过
远程子网：指定哪些子网通过 VPN，哪些不通过
步骤3：在协议列表中，选择您需要的协议，然后输入您的VPN提供商提供的VPN信息。
• PPTP VPN
输入 VPN 服务器地址（例如，113.92.73.163）以及 VPN 提供商提供的 VPN 用户名和密码。
• L2TP VPN
输入 VPN 服务器地址（例如 113.92.73.163）、VPN 用户名和密码以及 VPN 提供商提供的预共享密钥。
如果您的 VPN 提供商还为您提供了与帐户绑定的隧道 IP，您可以启用使用自定义隧道 IP选项。
• OpenVPN
单击浏览器导入您的 VPN 提供商提供的配置文件。
• WireGuard VPN
单击浏览器导入您的 VPN 提供商提供的配置文件。
接口和对等点将自动从您的 VPN 提供商的CONF 文件同步。
• ZeroTier 从属
输入 ZeroTier Master 提供的ZeroTier 网络 ID和网关。网关可以在 VPN 状态部分找到。
186 条评论
Good morning, I created LAN1 with an OpenVPN server on an OpenWrt router and LAN2 with a Cudy LT500 OpenVPN client router. The VPN (TUN) closes but I can’t ping LAN2 from LAN1. From within Cudy, I can ping devices on LAN1 and those addressed to the VPN network via the VPN interface, but from the Cudy LAN interface, however, I can’t. From LAN1, I can ping the server-side VPN interface but not the Cudy-side VPN interface or the Cudy-side LAN subnet. Basically, the VPN isn’t redirected to the Cudy LAN. I’ve tried every possible Cudy setting to no avail. It seems there’s a missing network connecting the VPN to the LAN. Do you have any suggestions? Is there any way to access it via SSH to manually add the missing routes? If so, how? Thanks.
@Dear TEN,
OK, I will reply you via email.
“Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix”
Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix.
@Dear TEN,
Sorry, please tell me details about the problem you encountered.
“Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?”
Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?