Port yönlendirmeleri nasıl yapılandırılır?

Port yönlendirme özelliği, internet üzerindeki uzak bilgisayarların özel yerel ağ (LAN) içindeki belirli bir bilgisayara veya hizmete bağlanmasına olanak tanır.
Farklı hizmetler farklı servis portları kullanır, lütfen yapılandırmadan önce servis port numarasını doğrulayın.
Önemli:
Cudy yönlendiricisinin İnternet Servis Sağlayıcınızdan bir Genel IP (WAN IP) adresi aldığından emin olun; eğer özel bir IP adresi alıyorsa, bu Cudy'nin önünde başka bir NAT cihazı olduğu anlamına gelir. Bu cihazda da servis portlarını açmanız gerekir.
IP adresinin herkese açık mı yoksa özel mi olduğunu nasıl doğrulayacağınız konusunda bilgi için lütfen şu bağlantıya bakın:
http://en.wikipedia.org/wiki/Private_network

 

Cudy'nin WAN IP adresini nasıl kontrol edebilirim?

Kablosuz Yönlendirici ve Mesh (Sistem Durumu > WAN > Durum)

 

4/5 Yönlendirici (Sistem Durumu->Hücresel/4G->Durum)

Not:

1. Genellikle, Genel IP ve IP Adresi aynıysa, Genel IP adresiniz olduğu anlamına gelir. IP Adresi, İnternet Servis Sağlayıcınızdan aldığınız WAN IP Adresidir. Yukarıdaki Genel IP ise diğer cihazların sizi internet üzerinden bulabileceği IP Adresidir. Dolayısıyla, Cudy yönlendirici özel bir IP adresi alıyorsa, bu Genel IP adresini hangi cihazın kullandığını bulmanız ve üzerinde portları açmanız gerekir.

2. Çoğu hücresel yönlendirici için internet servis sağlayıcısı genellikle özel bir IP adresi verir. Bu nedenle, port yönlendirmesi yapmak istiyorsanız, lütfen internet servis sağlayıcınızla iletişime geçerek size genel bir IP adresi atamalarını veya port yönlendirmesini onların tarafında yapmalarını isteyin.

 

Adım 1: Bir web tarayıcısı açın ve şu adrese gidin:http://cudy.netveyahttp://192.168.10.1.

Ayrıntılar için lütfen bakınız.Cudy Router'ın web arayüzüne nasıl giriş yapabilirim?

Adım 2: TıklamakGelişmiş Ayarlar -> Bağlantı Noktası Yönlendirmeleriiçindebölüm.

3. Adım:TıklamakEklemekListeye bir giriş eklemek için. Aşağıdaki gibi alana istediğiniz parametreleri girin.

Örneğin:Aşağıdaki yapılandırmaya göre, 192.168.10.18 IP adresli sunucunun TCP 5000 portu, UDP 5001 portu ve hem TCP hem de UDP 6000 portu internete açılacaktır.

İsim:
Hafızayı kolaylaştırmak için kullanılan girişin adı.
Protokol:
TCP, UDP veya TCP+UDP
Harici Bağlantı Noktası:
WAN tarafında internetten erişilebilen servis portu.
Dahili IP adresi:
İnternete erişim sağlayacak portu açacak olan sunucunun IP adresi.
Dahili Bağlantı Noktası:
Yerel ağdaki ana bilgisayarın servis portu
Not:
Genellikle dahili port, harici portla aynıdır.

Adım 4: Tıklamak 'Kaydet ve UygulaAyarları kaydetmek için ' tuşuna basın.
Durum sayfasına gidin ve yönlendiricinin WAN IP adresini kontrol edin. Şimdi, açtığınız servise http://WAN IP:port numarası adresini kullanarak erişmeyi deneyebilirsiniz.

 

Bloga dön

42 yorum

@Dear FRANCISCO,
Yes, port forwarding is limited to a single internal IP address. You can’t set like this.

“I have a question: Is port forwarding limited to a single internal IP address, or can the same port be opened for multiple internal IP addresses? For example, if I need to open port 443 for the internal address 192.168.10.5, and also for 192.168.10.8, how would I do that?”

Support

I have a question: Is port forwarding limited to a single internal IP address, or can the same port be opened for multiple internal IP addresses? For example, if I need to open port 443 for the internal address 192.168.10.5, and also for 192.168.10.8, how would I do that?

FRANCISCO VELEZ

@Dear Elshad,
Please enable the Remote Management function on the “Advanced Settings” -“System” -“Administrator” function page. Then you can try to login to the web page of the router from internet via the HTTPS protocol. You must use https://WAN IP address to access the management page. Not the HTTP.

“Dear support team.
I have 4G LTE N300 WiFi Routur
I get Public Static IP from Mobil operator but I can not reach from outside to my Cudy device 80 port.
I opened WEB 80 port
I tried from Port Forwarding side to add IP address of the Cudy 4G Routur IP address but can not reach outside internet to the Cudy modem.

Please support to solve this issue."

Support

Dear support team.
I have 4G LTE N300 WiFi Routur
I get Public Static IP from Mobil operator but I can not reach from outside to my Cudy device 80 port.
I opened WEB 80 port
I tried from Port Forwarding side to add IP address of the Cudy 4G Routur IP address but can not reach outside internet to the Cudy modem.

Please support to solve this issue.

Elshad

@Estimado Fran:
La dirección IPv4 celular es privada. Por lo tanto, no se puede acceder desde internet. Te sugiero usar la VPN Zerotier, que permite pasar la NAT. Aquí tienes las instrucciones.
https://www.cudy.com/blogs/faq/how-to-remote-connect-cudy-router-via-zerotier?pos=1&_sid=5ecdb2fb9&ss=r

Tengo un LT 500, la interfaces no es como esta , me dice wan / vpn y también tengo cliente wireguard ,como pudiera hacer, porque la ip addres y la publica son diferentes

Support

Yorum yapın