ดาวน์โหลดซอฟต์แวร์ OpenWrt

@Dear Kamil,
I think the firmware you downloaded is correct. Or you can’t upload it. So I suggest you to check if your computer’s IP address is obtained via DHCP? If not, please set it to DHCP. Because the manage IP address has been changed from 192.168.10.1 to 192.168.1.1. You need to login the web page of the router via new IP address.

“Hello Support Team,
I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:
Firmware Source: I downloaded the firmware file from a Google Drive link.
Upload Method: Web management interface, Firmware Upgrade section.
Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.
Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.
Could you please advise on:
Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.
Thank you for your assistance.
Best regards,
Kamil”

Hello Support Team,

I hope you’re doing well. I am experiencing an issue with my Cudy WR3000E router when attempting to upload a firmware file via the web interface:

Firmware Source: I downloaded the firmware file from a Google Drive link.

Upload Method: Web management interface, Firmware Upgrade section.

Problem: After the upload completes, the router becomes completely unresponsive (“bricked”). I cannot access the web interface, SSH, or any network services.

Attempts: I have tried this process twice, using the same firmware file each time, but the router bricks both times.

Could you please advise on:

Whether the firmware file I downloaded is correct and compatible with the WR3000E model.
A direct download link to an official firmware file, if available.

Thank you for your assistance.
Best regards,
Kamil

@Dear David,
Our technical support has sent you the solutions via email. Please check.

“Hey,
I’m having a AP3000 V1 on Firmware-Version
2.4.4-20250808-093007
I woul like to install openwrt. But I cant install the files Provides. If I try to upload I do get the message “file not found” even the image from your google drive.
Pleas help me to install openwrt”

@Dear Bob,
Yes, WR1300 V1.0 supports OpenWrt firmware. Please do it.

“Hardware platform: Cudy wr1300 v1.0 . This hardware appears to be supported by OpenWRT, it just needs your signature applied or the ability to disable your signature checking on WebUI firmware update. I am looking to enable sshd”

@Dear Dimitrios,
Thank you for contacting Cudy support team.
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Thanks!

“The firmware on the drive for wr1300e says File is invalid. Please retry. Can you provide me the correct one? Thanks”