Предупреждения
На этой веб-странице перечислено программное обеспечение устройств, поддерживающих систему OpenWrt. Прежде чем загружать и устанавливать программное обеспечение, обратите внимание, что OpenWrt Project — это операционная система Linux, предназначенная для встроенных устройств. Вместо того, чтобы пытаться создать единую статическую прошивку, OpenWrt предоставляет полностью доступную для записи файловую систему с управлением пакетами. Это освобождает вас от выбора и настройки приложений, предоставляемых поставщиком, и позволяет настроить устройство с помощью пакетов для соответствия любому приложению. Для разработчиков OpenWrt — это платформа для создания приложения без необходимости создания на его основе полноценной прошивки; для пользователей это означает возможность полной настройки и использования устройства непредвиденными способами.
Описание
<ол>Гарантия:
Кади настоящим заявляет
<ол>Загрузите прошивку OpenWrt для удаления проверки подписи: Диск
Поиск прошивки OpenWrt (не выпущен Cudy): Выбор прошивки OpenWrt
Комментариев: 1310
@Dear Guglielmo,
No, the OpenWrt firmware for WR1300 3.0 and 4.0 are different. We must wait for some developer to develop the OpenWrt firmware for WR1300 4.0 first. Then we can offer the intermediate firmware for WR1300 4.0.
“Hello, I have baught a bunch of WR1300. Some of them are v3, but some came as v4. On v3 i could download the intermediate firmware and the install OpenWrt. Are you going to release the same for v4? I’d like to install openwrt also on them. Thank you! With OpenWrt this is a great product”
@Dear Tod,
Our technical support has sent you the firmware via email. Please check.
“Hello, Would it be possible to send me the TR3000 (256mb flash) intermediary firmware?
It says the file is invalid when I try to upgrade it with TR3000 V1.
Thank you in advance."
@Dear Tomáš,
Our technical support has sent you the firmware via email. Please check.
“Hello,
Could you please provide the signed OpenWrt sysupgrade intermediary firmware for the AP3000 v1.0 Ceiling model, via email or ideally via your Google Drive repository?
Thank you for your support.
Best regards,
Tomáš Stejskal"
@Dear atish,
1. Please recover the firmware to the Cudy official firmware. Here is the instruction attached. Please download the Cudy official firmware 2.4.7 or later, then rename it to the recovery.bin to recover. You can download the firmware on the website below.
https://www.cudy.com/pages/download-center/tr3000-1-0
2. We have changed the model of the flash in the router TR3000 1.0. So the old intermediate firmware and OpenWrt firmware for TR3000 1.0 will not work. Please use the new intermediate firmware.
3. You must add the patch to the OpenWrt firmware, the the OpenWrt firmware will work. If you know how to upload it to the OpenWrt project. Please help to do it. The patch is also attached.
“hi , i am trying to install the signed software on my tr3000 to install openwrt, but gets stucked , can u please provide me with the new signed firmware . i had tried to do it on earlier router and it had gone through. i think the company has installed a new flash version whats why it is not going through . please check and revert back .”
Hi,
I do have TR3000 256MB. Can I get the intermediate firmware, thanks a lot.