Предупреждения
На этой веб-странице перечислено программное обеспечение устройств, поддерживающих систему OpenWrt. Прежде чем загружать и устанавливать программное обеспечение, обратите внимание, что OpenWrt Project — это операционная система Linux, предназначенная для встроенных устройств. Вместо того, чтобы пытаться создать единую статическую прошивку, OpenWrt предоставляет полностью доступную для записи файловую систему с управлением пакетами. Это освобождает вас от выбора и настройки приложений, предоставляемых поставщиком, и позволяет настроить устройство с помощью пакетов для соответствия любому приложению. Для разработчиков OpenWrt — это платформа для создания приложения без необходимости создания на его основе полноценной прошивки; для пользователей это означает возможность полной настройки и использования устройства непредвиденными способами.
Описание
<ол>Гарантия:
Кади настоящим заявляет
<ол>Загрузите прошивку OpenWrt для удаления проверки подписи: Диск
Поиск прошивки OpenWrt (не выпущен Cudy): Выбор прошивки OpenWrt
Комментариев: 1309
Dear Cudy Support Team,
I desperately need your assistance with my bricked WR3000E router. Here is the complete situation:
Device Details:
Model: Cudy WR3000E
Hardware Version: v1.0
Original Firmware: 2.2.6-20240902-033948
What I have done:
Downloaded official firmware WR3000E-R53-2.4.7-20250528-182254-sysupgrade.zip from your website
Renamed it to recovery.bin and attempted TFTP recovery
The TFTP transfer completed successfully (log attached – 20MB transferred in 9 seconds)
After transfer, the router’s internet LED flashed slowly for over 20 minutes
After power cycling, only the power LED is on
The router responds to ARP and has IP address 192.168.1.112
However:
Cannot access web interface at 192.168.1.112
Cannot connect via SSH or Telnet (connection timed out)
Internet LED does not light up normally
My question:
Is my router recoverable?
Do you have a special recovery tool or different firmware file for units with 128MB flash (if mine is one of those)?
Should I try a different recovery method?
tftplog : Connection received from 192.168.1.112 on port 2096 [13/03 05:40:51.666]
Read request for file . Mode octet [13/03 05:40:51.666]
File : error 2 in system call CreateFile The system cannot find the file specified. [13/03 05:40:51.667]
Connection received from 192.168.1.112 on port 2096 [13/03 05:41:25.544]
Read request for file . Mode octet [13/03 05:41:25.545]
File : error 2 in system call CreateFile The system cannot find the file specified. [13/03 05:41:25.545]
Connection received from 192.168.1.112 on port 2096 [13/03 05:42:08.362]
Read request for file . Mode octet [13/03 05:42:08.363]
OACK: <timeout=5,blksize=1468,> [13/03 05:42:08.363]
Using local port 51282 [13/03 05:42:08.363]
: sent 13664 blks, 20057628 bytes in 9 s. 1 blk resent [13/03 05:42:17.384]
Connection received from 192.168.1.112 on port 2096 [13/03 06:24:21.776]
Read request for file . Mode octet [13/03 06:24:21.776]
OACK: <timeout=5,blksize=1468,> [13/03 06:24:21.790]
Using local port 59907 [13/03 06:24:21.790]
: sent 13485 blks, 19795484 bytes in 9 s. 1 blk resent [13/03 06:24:30.652]
Connection received from 192.168.1.112 on port 2096 [13/03 06:25:19.368]
Read request for file . Mode octet [13/03 06:25:19.368]
OACK: <timeout=5,blksize=1468,> [13/03 06:25:19.368]
Using local port 56482 [13/03 06:25:19.368]
: sent 13485 blks, 19795484 bytes in 9 s. 1 blk resent [13/03 06:25:28.340]
Thank you for your support.
“Dear Cudy Support Team,
Doesn’t work
File is invalid. Please retry.
Uploaded File: cudy_wr3000e-v1-sysupgrade.bin
Size: 12.63 MB (13241931 B)
MD5: 77e6d84f93081732d4c130521078991a
@Dear Ahmed Elbiomy,
Our technical support has sent you the firmware via email. Please check.
“Dear Cudy Support Team,
I am writing to request the correct intermediate firmware file needed to install OpenWrt on my router.
My router details are:
· Model: Cudy WR3000E
· Hardware Version: v1.0
· Current Firmware Version: 2.2.6-20240902-033948
I have tried several intermediate files, but they were rejected. Could you please provide me with the correct intermediate firmware file compatible with my current firmware version?
Thank you for your assistance."
@Dear Grzegorz,
Our technical support has sent you the intermediate firmware via email. Please check.
In addition, your AP3000 supports VLAN mapping SSID function. You can set it on the web page of the AP3000 when creating the SSID. Please have a try.
""@Dear grzegorz,
What is the model of your Cudy AP?
my device:
Firmware Version 2.4.7-20260115-152710
Historic Version 2.4.7-20260115-152710
Model AP3000
Hardware AP3000 V1.0
“help mi !!
File is invalid. Please retry.
Uploaded File: openwrt-25.12.0-mediatek-filogic-cudy_ap3000wall-v1-squashfs-sysupgrade.bin
Size: 9.00 MB (9441562 B)
MD5: 72827a30761e73dee7020e58c7d7c477"
""
@Dear Ahmed Elbiomy,
Our technical support has sent you the firmware via email. Please check.
“Dear Cudy Support Team,
I am writing to request the correct intermediate firmware file needed to install OpenWrt on my router.
My router details are:
· Model: Cudy WR3000E
· Hardware Version: v1.0
· Current Firmware Version: 2.2.6-20240902-033948
I have tried several intermediate files, but they were rejected. Could you please provide me with the correct intermediate firmware file compatible with my current firmware version?
Thank you for your assistance."
Nie sety nie da się wgrać do mojego urządzenia AP3000 Wall 1.0.zip oto błąd
File is not compatible with the device model(s).
Uploaded File: cudy_ap3000wall-v1-sysupgrade_20251119.bin
Size: 14.25 MB (14945878 B)
MD5: 376d404fd1535cc51168e365e2374427
szczerze bardzo żałuje swojego zakupu mogłem kupić tplinka bo potrzebuje funkcji vlan gdzie tego w podstawie nie ma