Предупреждения
На этой веб-странице перечислено программное обеспечение устройств, поддерживающих систему OpenWrt. Прежде чем загружать и устанавливать программное обеспечение, обратите внимание, что OpenWrt Project — это операционная система Linux, предназначенная для встроенных устройств. Вместо того, чтобы пытаться создать единую статическую прошивку, OpenWrt предоставляет полностью доступную для записи файловую систему с управлением пакетами. Это освобождает вас от выбора и настройки приложений, предоставляемых поставщиком, и позволяет настроить устройство с помощью пакетов для соответствия любому приложению. Для разработчиков OpenWrt — это платформа для создания приложения без необходимости создания на его основе полноценной прошивки; для пользователей это означает возможность полной настройки и использования устройства непредвиденными способами.
Описание
<ол>Гарантия:
Кади настоящим заявляет
<ол>Загрузите прошивку OpenWrt для удаления проверки подписи: Диск
Поиск прошивки OpenWrt (не выпущен Cudy): Выбор прошивки OpenWrt
Комментариев: 1300
@Dear Astemir.
You router is 128MB Flash version. Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support Team,
I have a Cudy TR3000 v1.0 router and would like to install OpenWrt on it.
Device details:
- Model: TR3000 v1.0
- Serial Number: S0006956260910307
- Current stock firmware version: 2.4.22-20251113-125907
Could you please:
1. Confirm which flash chip my unit uses (F50L1G41LB or F50L1G41LC) and the flash size (128 MB or 256 MB), based on the serial number above.
2. Send me the Cudy-signed OpenWrt intermediate firmware compatible with my hardware revision, so I can install OpenWrt without bricking the device.
Thank you in advance!
Best regards,
Astemir"
Hello Cudy Support Team,
I have a Cudy TR3000 v1.0 router and would like to install OpenWrt on it.
Device details:
- Model: TR3000 v1.0
- Serial Number: S0006956260910307
- Current stock firmware version: 2.4.22-20251113-125907
Could you please:
1. Confirm which flash chip my unit uses (F50L1G41LB or F50L1G41LC) and the flash size (128 MB or 256 MB), based on the serial number above.
2. Send me the Cudy-signed OpenWrt intermediate firmware compatible with my hardware revision, so I can install OpenWrt without bricking the device.
Thank you in advance!
Best regards,
Astemir
@Dear Ilya,
Our technical support has sent you the firmware via email. Please check.
“Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya"
Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya
@Dear Connect Pro,
Our technical support has contacted you via email. Please check.
“Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!”