TR3000 firmware version 2.3.7 has added support for USB Tethering function, which allows you to share the network by connecting a mobile phone or a portable Wi-Fi device via a USB data cable. The following describes how to set it up.
1. Router settings
After TR3000 is upgraded to 2.3.7 firmware, the USB Tethering function is enabled by default. No settings are required, plug and play.
2. Mobile phone settings
- For Android phones,
a. Take Samsung phones as an example, open "Settings"--"Connections"--"Mobile Hotspot and Tethering", and enable the "Mobile hotspot" function and the "USB tethering" function respectively. As shown in the figure below.
b. Take Xiaomi phones as an example, open "Settings"--"Portable hotspot", and enable the "Portable hotspot" function and the "USB tethering" function respectively. As shown in the figure below.

- For iPhone, open Settings and enable the Personal Hotspot function; (When connecting for the first time, the iPhone needs to enter the lock screen password to allow the router to share the network)

The router will automatically identify and connect to the Internet. After the connection is successful, the status is also as shown in the figure below. The settings are complete and the network is successfully connected.
Note: If the TR3000 does not correctly identify your mobile phone or portable WiFi router after you have set it up properly, it is likely that you are using a long or poor quality USB cable, such as a USB 2.0 cable. We recommend that you try replacing it with a better quality and shorter USB 3.0 cable.
Комментариев: 23
@cudy支持者
感谢支持!
“现在用的中兴F50加上TR3000,刷新系统后,配合的非常好,网速好快的说!完美!”
现在用的中兴F50加上TR3000,刷新系统后,配合的非常好,网速好快的说!完美!
@小土休平
你好
你说的这个想法,目前还无法实现,因为手机没有网线接口,网线也就插不进去手机。而且网线接口一般比较大,不适合手机。
“您好,我在想既然可以通过USB共享手机网络的话,是否可以实现通过网线连接手机和路由器来共享手机网络呢?如果可以的话,我该如何操作与设置。”
您好,我在想既然可以通过USB共享手机网络的话,是否可以实现通过网线连接手机和路由器来共享手机网络呢?如果可以的话,我该如何操作与设置。
@gdzyh,
你好,非常感谢您的建议,我们已经将建议转发给负责产品功能规划的产品经理。
“希望openvpn、wireguard的服务端和客户端参照华硕的路由的界面方式;例如openvpn服务端接口类型可以选择tun或者tap;WireGuard的客户端可以设置allowed IPs,服务端配置客户端可以用二维码导出配置。最好能支持DDNSGO或者自带域名。”