Как построить целую домашнюю ячеистую сеть с помощью продукта Cudy?

Система Cudy Whole Home Mesh создана для устранения мертвых зон и обеспечения бесперебойного Wi-Fi по всему дому. Эта статья поможет вам шаг за шагом построить ячеистую систему.

Подготовка:
1. Убедитесь, что у вас есть как минимум два продукта Cudy.

2. Все продукты Cudy поддерживают технологию Mesh: Официальный сайт Home Mesh-Cudy

3. Прошивка обновлена: Центр загрузки

4. Используйте их в одной комнате во время настройки.

5. Сбросьте все ваши продукты Cudy к заводским настройкам по умолчанию. (При включенном питании нажмите и удерживайте кнопку RESET с помощью булавки в течение 6 секунд, затем отпустите.)

6. Настройте основной маршрутизатор и подключите его к Интернету.

В качестве примера мы возьмем M1800 и WR2100:

Шаг 1. Откройте веб-браузер и перейдите по адресу http://cudy.net или http://192.168.10.1

Подробную информацию см. в Как войти в веб-интерфейс Cudy Router?

Шаг 2: На странице состояния системы нажмите кнопку Кнопка "+".

Шаг 3. Нажмите кнопку WPS на M1800, а затем нажмите кнопку WPS на WR2100.

Основной блок сетки: мигающий белый

Дополнительный блок сетки: мигающий попеременно белый и красный

Шаг 4: Он перейдет к « Сканирование", затем " Подключение".

Шаг 5. Подождите, пока системный индикатор дополнительного маршрутизатора не загорится ровным синим светом, а затем переместите WR2100.

Шаг 6. Успех и удовольствие от ячеистой сети.

Примечание:

1. Маршрутизатор 4/5G можно настроить только как основной ячеистый блок. Например:

<р>2. Вы не сможете войти в веб-интерфейс дополнительного Mesh-маршрутизатора. Если вы хотите изменить настройки, нажмите «Состояние системы»->»Сетка».

Вернуться к блогу

Комментариев: 10

@Bruno,
Dear Bruno,
LT500 can only work as main mesh router. Can’t work as satellite mesh router. So you can’t install mesh system with them. Please return it and buy a new Cudy Wireless router,such as WR1300 to install mesh system.

“Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(”

Support Cudy

Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(

Bruno

@Maciek
Dear Customer,
Thank you for contacting Cudy support team.
Sorry for the inconvenience caused to you! We have plan to add this feature next months via firmware update. It will come soon. Please wait patiently.

“The WR3600 router with the latest firmware does not have the Mesh WiFi feature.”

Support Cudy

The WR3600 router with the latest firmware does not have the Mesh WiFi feature.

Maciek

@Ahmed,
Dear Ahmed,
Sorry to tell you that WR6500 doesn’t support Mesh function now. We have plan to add this feature next month. Please wait. For now, if you plan to connect them via wired cable, you can set the WR3000 to the Access Point mode, then connect to the WR6500’s LAN port. If you plan to connect them via WiFi, you can set the WR3000 to the Wireless extender mode to connect the 5GHz WiFi of WR6500. It will work too. Then you will be able to update the new firmware to support mesh function when the new firmware release.

“I want to setup a mesh network between wr6500 (main) and my old wr3000 (satellite) but there’s no + sign on the setup page for the wr6500.
Is it possible to add that feature? If not available already and I just can’t find it. Because it’s mentioned on the product page for the wr6500 that it supports whole home mesh.”

Support Cudy

Комментировать