Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим WISP и нажмите кнопку Далее.
Шаг 3. Выберите свой часовой пояс.
Шаг 4. Выберите основную сеть, которую надо расширить, и нажмите кнопку Подключиться.
Либо перейдите в раздел Общие настройки 🡢 WISP и нажмите кнопку Включить, затем выберите основную сеть, которую надо расширить.
Шаг 5. Введите пароль основной сети.
Шаг 6. Оставьте имя и пароль сети Wi-Fi по умолчанию или измените их.
Шаг 7. Нажмите кнопку Сохранить и применить, чтобы завершить настройку.
Шаг 8. Дождитесь завершения перезагрузки. Готово!
Комментариев: 120
@z,
Our technical support has sent you the solutions via email. Please check.
Cudy ap3000 outdoor v1
Came with firmware 2.2.6 (not available on website for download but only updating from interface)
Yesterday tried with firmware 2.1.1 available on website and after flashing still same issue
Product purchased here: https://www.sg1shop.it/it/home/informatica/rete-networking/router/cudy-ap3000-outdoor-ax3000-high-power-wifi-6-outdoor-access-point.1.1.45.gp.10059.uw
@Dear Z,
It is strange. What the model and firmware version of your Cudy device. Please check and reply me.
“On range extender: wifi internet works, ethernet works.
On WISP: wifi internet works, ethernet no, no identification
I need WISP as for me is important to isolate the new network from the main one,I don’t want devices to be found on the same network"
On range extender: wifi internet works, ethernet works.
On WISP: wifi internet works, ethernet no, no identification
I need WISP as for me is important to isolate the new network from the main one,I don’t want devices to be found on the same network
@Dear z,
You can try to set the cudy router to range extender mode and check again?
In addition, when set WISP mode, does the WISP interface get the correct IP address from the main WiFi? What is the internet Status on the WEB page?