Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим WISP и нажмите кнопку Далее.
Шаг 3. Выберите свой часовой пояс.
Шаг 4. Выберите основную сеть, которую надо расширить, и нажмите кнопку Подключиться.
Либо перейдите в раздел Общие настройки 🡢 WISP и нажмите кнопку Включить, затем выберите основную сеть, которую надо расширить.
Шаг 5. Введите пароль основной сети.
Шаг 6. Оставьте имя и пароль сети Wi-Fi по умолчанию или измените их.
Шаг 7. Нажмите кнопку Сохранить и применить, чтобы завершить настройку.
Шаг 8. Дождитесь завершения перезагрузки. Готово!
Комментариев: 120
Both Pavel and I encountered the same issue in WIPS mode, where the device fails to connect to most 5GHz Wi-Fi networks. I saw that support recommended using channels 36–48 (UNII-1). May I ask how to connect to channels 52–64 (UNII-2) and 100–144 (UNII-2 Extended)? Many 5GHz Wi-Fi networks in Hong Kong operate on the 100–144 range. I am using the TR1200 V1 with firmware version 2.4.15 CN.
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”