Прежде чем создавать Mesh-сеть
1. Убедитесь, что есть по крайней мере два устройства Cudy.
2. Убедитесь, что все имеющиеся устройства Cudy поддерживают технологию Mesh.
3. Убедитесь, что на всех устройствах установлена последняя версия прошивки.
4. Убедитесь, что все устройства находятся в одной комнате (на время настройки).
5. Восстановите заводские настройки на всех устройствах Cudy.
6. Настройте основное Mesh-устройство и установите на нём подключение к интернету.
Инструкция по созданию Mesh-сети
В данном примере используются модели M1800 и WR2100:
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Нажмите на знак плюса (+) в разделе «Состояние системы».
Шаг 3. Нажмите на кнопку WPS на корпусе устройства M1800, затем нажмите на кнопку WPS на корпусе устройства WR2100.
Индикатор на основном Mesh-модуле должен мигать белым. Индикатор на вспомогательном Mesh-модуле должен мигать красно-белым.
Шаг 4. Откроется окно Сканирование, затем окно Подключение.
Шаг 5. Дождитесь, когда индикатор на вспомогательном модуле будет непрерывно гореть синим, затем переместите WR2100 в нужное место.
Шаг 6. Mesh-сеть успешно создана!
Комментариев: 87
I bought 2 pcs of WR11000 and they don’t see each other in mesh mode. I see that You plan to add this functionality – but question is when – its a week or half year – because if its second option – I’m returning my routers to Amazon.
@Paul
Dear Customer,
Thanks for contacting the Cudy support team. I need some information.
WR11000 only support to work as the main Mesh device now. So you can’t install mesh with two WR11000. But we have plan to add satellite Mesh function recently. Please wait patiently. For now, you can set the second on to work on the Access Point mode and set the same WiFi name and password.
“Hello, will two wr11000 routers work in a mesh network connected by ethernet cable?”
Hello, will two wr11000 routers work in a mesh network connected by ethernet cable?
@Dear Kurt,
Thanks for contacting the Cudy support team.
Sorry to tell you that WR11000 only support to work as main mesh. But doesn’t support to work as satellite mesh. So you can install mesh system with two WR11000. Do you plan to install Mesh network with them via cable or WiFi. If cable, please try to set the second one to be the Wireless Access Point mode. As shown below. We will update the new firmware in future to support mesh. If via WiFi, I suggest you to buy a WR6500 to replace the WR11000 to work as the satellite mesh, or you can wait for the new firmware of WR11000
“Hello, I purchased 2x WR11000 units to mesh together, but they cannot find each other during mesh search. please advise?”
Hello, I purchased 2x WR11000 units to mesh together, but they cannot find each other during mesh search. please advise?