Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
I have a Cudy R700 router setup with two wan Ports and linked tot two tp-link 4g routers
when im onsite and pluged in i can access my routers on the 192.168.1.1/24 range
but when i connect to the vpn i setup with openvpn server and i connect i cant access none of my wan ports or log in to my tp-link routers through the vpn i did switch on management but still no luck please i need this working other wise i have to go to reyee cloud router
@Netanel,
Please tell the model of your router and what is the issue?
“I would like to get the beta firmwire which will fix OpenVPN issue”
@Penio,
Our technical support has sent you the solutions via email. Please check.
“Hi there,
I purchased the Cudy AX3000 router to use as WireGuard VPN Server that I can connect to when I’m away.
Once configured as WireGuard VPN server, I will connect it to my friend’s ISP router and leave it there so he can keep an eye on it when I’m away. I will use the config file that you can download to setup the client on my laptop so I can route all my laptop traffic to my friends house/internet and I will appear as if I’m at his location.
My question is, is this possible with the Cudy AX3000 router and if yes, what other settings do I need to enable/configure so I can always connect to the router when I’m away and make sure connection is always up?
Thank you in advance for your response."
I would like to get the beta firmwire which will fix OpenVPN issue
Hi there,
I purchased the Cudy AX3000 router to use as WireGuard VPN Server that I can connect to when I’m away.
Once configured as WireGuard VPN server, I will connect it to my friend’s ISP router and leave it there so he can keep an eye on it when I’m away. I will use the config file that you can download to setup the client on my laptop so I can route all my laptop traffic to my friends house/internet and I will appear as if I’m at his location.
My question is, is this possible with the Cudy AX3000 router and if yes, what other settings do I need to enable/configure so I can always connect to the router when I’m away and make sure connection is always up?
Thank you in advance for your response.