Резервирование IP используется для присвоения статического адреса IPv4 MAC-адресу.
Шаг 1: Откройте веб-браузер и перейдите по адресу http://cudy.net или http://192.168.10.1.
Подробную информацию см. на Как войти в веб-интерфейс Cudy Router?< /п>
Шаг 2. Нажмите Дополнительные настройки -> Привязка IP/MAC в разделе Безопасность.< /п>
Шаг 3. Нажмите Добавить, чтобы добавить одну запись. в список. Выберите устройство из списка MAC-адресов и введите IP-адрес, который вы хотите выделить. Введите комментарий к этой записи (необязательно).
Шаг 4: Сохранить и добавить; Примените настройки.
Отключите устройство и подключитесь снова. Затем вы можете проверить IP-адрес устройства, если вы установили IP-адрес.
Примечание. IP-адрес и MAC-адрес этих записей также привязываются к ARP.
Комментариев: 14
@Dear Ron Rossi,
For now Cudy routers don’t support this. We will provide your feedback to the product department for evaluation.
“I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.”
I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.
@Dear Petros,
Our technical support has contacted you via email. Please check.
“Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you”
Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you
@Dear Moses,
I don’t understand what do want to ask, please tell me more details about your question.
“How devices you bing using IP/MAC Adrress binding. Limitation of devices on network”