Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1319 comentários
@Dear araujorm,
Our technical support has sent you the firmware via email. Please check.
“Hi. It’s been a few weeks since I’ve sent Cudy via email a Openwrt image that should be suitable for RE1800 V2, and also shared the link to the github repository for it, asking if you could sign it so that I can finish providing support for it along with the Opewrt team. After an initial reply asking to wait, I got no other replies. Could you please take a look into it?”
@Dear Viktor (tg: OriginWave),
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number starts with 2549
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
@Уважаемая Никита,
Прошивки OpenWrt для WR1300 v4 не существует.
“Здравствуйте, поддерживает ли Cudy WR1300 v4 OpenWrt? Я нашел промежуточную прошивку на гугл диске для v4, но не нашел прошивку OpenWrt для v4.”
@Dear Lukas,
Our technical support has contacted you via email. Please check.
“Hello,
I have a Cudy WR3000 v1.0 router.
Serial number starts with: 2517
Current stock firmware: 2.4.19-20250828-192837
I downloaded the package:
“WR3000+V1 without recovery TFTP”
However, the package only contains:
- openwrt-mediatek-filogic-cudy_wr3000-v1-sysupgrade.bin
The stock Cudy firmware rejects this file with an error during firmware upgrade.
From the OpenWrt installation instructions, it seems that a signed intermediate firmware or factory image is required before installing OpenWrt.
Could you please provide the correct intermediate firmware for WR3000 v1.0 compatible with the latest stock firmware?
Thank you."
@Dear Leo,
We don’t change the Flash chip on WR3000 1.0. Please just use the intermediate firmware “WR3000 v1 without recovery TFTP” .
“Hello!
Device: Cudy WR3000 v1.0
Serial Number: 2553…
Stock firmware version: 2.4.19-20250828-192837
The publicly available intermediate firmware in your Google Drive folder
“WR3000 v1 without recovery TFTP” is incompatible with the new F50L1G41LC
flash chip used in units manufactured from week 43 of 2025 onward.
Could you please email me the updated Cudy-signed intermediate firmware
for the WR3000 v1.0 with the new flash chip?
Thank you!"