Download do software OpenWrt

Avisos

Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.

Descrição

  1. Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
  2. Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
  3. Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.

Garantia:

Cudy declara por meio deste

  1. Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
  2. Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
  3. Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.

Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir

Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt 

Voltar para o blog

1319 comentários

Hi, I bought some AP3000 WAPs specifically because I saw there was OpenWRT support. But now, in attempting to convert them over to vanilla OpenWRT, I see that there is no longer an intermediary firmware image, as the OpenWRT site describes (I see AP3000 Wall and AP3000 Outdoor, but neither work). This is unfortunate. Is there support for this or intent to support soon, or do I need to return this and go another route?

meep

@Dear Alexander,
Yes. You can. We have updated the intermediate firmware in the Google Drive. OpenWrt forun also has updated the OpenWrt firmware to 24.10.5 which support the new FLASH. So. please do it.

“I have WR3000S with SN 2547. Could I flash Cudy’s intermediate OpenWRT firmware for the migration to clean OpenWRT?”

Support

@Dear Andrey,
So far as I know, there is no OpenWrt firmware for WR1300 4.0 currently. Some developers are working on this. We will upload the intermediate firmware for WR1300 4.0 when they finish the development of this job.

“Hello. Just took WR1300 for use with openwrt, but version is 4.0. Can you send me instructions for install openwrt to this model, or I have to return it?
Also have WR3000 V2.0 with same problem. Thanks.”

Support

I have WR3000S with SN 2547. Could I flash Cudy’s intermediate OpenWRT firmware for the migration to clean OpenWRT?

Alexander

Add gaming mode or Fast packet path system to lower the ping for cudy p4

Abdu

Deixe um comentário