Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
900 comentários
WR11000 support is planned?
Could you redistribute current stable 24.10 official builds as signed intermediate?
I’ve seen a request in the official OpenWRT forum where someone seemingly used your intermediate file of a 23.05 build, updated to official 24.10 but forgot to uncheck the “keep settings” checkbox. This left his box stuck because due to some config mismatches. Seems like your build is somehow not 100% compatible with official stock builds in terms of configs.
While I know this is documented in every routers OpenWRT wiki page, the situation could have been avoided if you took the current stable stock file from the OpenWRT downloads server, sign it and put it up on your google drive to download.
I assume the only reason for you to provide a bin file here at all is that the initial switch to OpenWRT requires a cryptographically signed binary. Which you could provide without using a custom build but by just signing an arbitrary stable official build.
To be clear, I’m not asking to provide stock builds for any new device other than those that are already available at your google drive, I’m just asking to switch your custom builds that are signed with stock builds that are signed.
“Hi Cudy Support,
it seems OpenWRT add Support for “Cudy AP1300 Outdoor” (see https://github.com/openwrt/openwrt/pull/16265).
Currently there is no OpenWRT image available but hopefully in the near future.
Can you generate the intermediate firmware for “AP1300 Outdoor” (AC1200) FW:2.2.6 V1 so we are able to install it when OpenWRT is available?
Thank you
Is there any chance for a firmware that removes the checks for the WR11000?
@Dear Kostas,
This is a good idea. We will consider about it.
“Hi, why not create a support forum ? It will be great help for all and future Cudy users.”