Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1363 comentários
@Dear Ilya,
Our technical support has sent you the firmware via email. Please check.
“Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya"
Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya
@Dear Connect Pro,
Our technical support has contacted you via email. Please check.
“Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!”
Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!
@Dear Connect,
Did you unzip the firmware before update?
“Hello,
I have recently purchased the C200P controller, the SN starts with 2531. I would like to use it just as a router with the ability to do Vlans, hence I tried to flash it with OpenWrt. I followed the instructions everywhere with the 2 step (intermediary first then OpenWrt) but the device is not even accepting the intermediary flash that i downloaded and unzipped following the link to the google drive files, instead I get: “File is not compatible with the device model(s).” I have tried with multiple browsers also!
Current firmware on the C200P is 2.4.7 (11-Feb-2026)
Any ideas?
Kind regards.”