O roteador Cudy LTE possui uma porta LAN/WAN, permitindo que alteremos o modo de funcionamento da porta e utilizemos uma rede 4G/5G como solução de backup para acesso à internet. Quando a porta LAN/WAN funciona no modo WAN, o roteador se conectará à rede 4G/5G caso o serviço de rede original falhe.
Topologia de rede comum:
Etapa 1: certifique-se de que a rede 4/5G já esteja configurada com sucesso.
Etapa 2: Abra um navegador da web e vá parahttp://cudy.netouhttp://192.168.10.1.
Para mais detalhes, consulteComo fazer login na interface web do Cudy Router?
Etapa 3: Vá paraConfigurações avançadas->Comutador LAN/WAN.
Etapa 4: Clique em 'Mudar para WAN', então o roteador será reinicializado e aplicará as configurações.
Etapa 5: Conecte o roteadorLAN/WANporta para o modem ou a porta de rede.
Observação: Certifique-se de que você já tem um modem ou que sua internet seja de uma tomada Ethernet que forneça internet para você.
Etapa 6: Quando a configuração estiver concluída, você verá o status abaixo na página Status do Sistema.
18 comentários
Hallo,
ich habe das gleiche Problem wie hier am 02.08.2025 geschildert:
“Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.”
@Dear H，
Our technical support has contacted you via email. Please check.
“Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.”
Hello I have internet being fed from another router (“Network A”) to my Cudy LTE Modem/Router (“Network B”). If Network A loses internet but is still working as a network (just no internet). The Cudy LTE failover does not kick in because it does not realize the internet is down. I tried changing the online detection settings but that did not work.
@Dear Molon,
The function depends on the “Advanced Setting” —“Online Check” function. Did you disable it. If yes, please enable it.
“Hello, first my cuddy Lte n300 working well on 4g. My point is I configure WAN, and when I put my câble, the router switch on WAN/4G. Until now everything is working as expected but if my main router has a connectivity issue, the cuddy router still continu to work on WAN whereas there is no more connectivity. So I don’t see the automatic switch on 4G”
Hello, first my cuddy Lte n300 working well on 4g. My point is I configure WAN, and when I put my câble, the router switch on WAN/4G. Until now everything is working as expected but if my main router has a connectivity issue, the cuddy router still continu to work on WAN whereas there is no more connectivity. So I don’t see the automatic switch on 4G