O que é o Modo de Ponto de Acesso?
O modo de ponto de acesso é quando o roteador usa uma conexão com fio ao roteador principal ou roteador modem para expandir a cobertura sem fio de uma rede doméstica.
Topologia de rede comum:
Passo 1:Abra um navegador da web e vá parahttp://cudy.netouhttp://192.168.10.1.
Para mais detalhes, consulteComo fazer login na interface web do Cudy Router?
Passo 2:A janela Configuração rápida será exibida, escolha 'Ponto de acesso sem fio, então clique em 'Próximo'.
Etapa 3:Escolha o seu 'Fuso horário'.
Passo 4:Confirme a conexão do hardware.
Etapa 5:Altere o nome e a senha da rede sem fio.
Etapa 6:Clique em "Salvar e aplicar" para concluir a configuração.
Passo 7:Aguarde alguns segundos para que o sistema reinicie. Quando a página de login aparecer novamente, você poderá aproveitar a internet.
Observação:
Após configurar o roteador Cudy no modo Ponto de Acesso, o endereço IP será atribuído pelo roteador host e o endereço IP padrão 192.168.10.1 não permitirá o login. Se precisar fazer login no roteador Cudy novamente, digite 'http://cudy.net'no seu navegador ou procure o endereço IP do roteador Cudy na lista de clientes do seu roteador principal (primário).
44 comentários
@Dear Marian,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.
“Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers”
Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers
@Dear naz,
Yes, the LAN ports are still work. You can connect the devices to the LAN ports to share the network.
For WR3000, the main difference is that it uses the 16MB Flash. Other routers use 128MB Flash. Then WR3000 has to delete some functions, such as IPSec VPN, DNS over TLS, Zerotoer VPN etc. Other routers support all of these functions.
“Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.”
Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.
@Dear Mike,
Please follow the steps:
1. Please update the latest firmware 2.4.5 for AP1300. You can download the firmware on the website.
https://www.cudy.com/pages/download-center/ap1300-1-0
2. Please reset all the three AP1300 that you want to work as the submesh AP. Setup the Wi-Fi settings of the main mesh AP1300.
3. Install them in the same network (in the same management VLAN). The mesh system will be installed automatically.
4. Please test and check if the network in working normally, as you want.
“Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans”