O sistema Mesh Cudy Whole Home foi desenvolvido para eliminar zonas mortas e fornecer Wi-Fi ininterrupto em toda a sua casa. Este artigo orientará você na construção de um sistema Mesh passo a passo.
Preparação:
1. Certifique-se de possuir pelo menos 2 produtos Cudy.
2. Todos os produtos Cudy são compatíveis com a tecnologia mesh: Home Mesh-Site oficial da Cudy
3. O firmware está atualizado:Centro de downloads
4. Leve-os para a mesma sala durante a configuração.
5. Redefina todos os seus produtos Cudy para as configurações de fábrica. (Com o aparelho ligado, pressione e segure o botão RESET com um alfinete por 6 segundos e depois solte.)
6. Configure seu roteador principal e conecte-o à Internet.
Aqui tomamos M1800 e WR2100 como exemplos:
Passo 1: Abra um navegador da web e vá parahttp://cudy.netouhttp://192.168.10.1.
Para mais detalhes, consulteComo fazer login na interface web do Cudy Router?
Passo 2: Na página Status do Sistema, clique no botão "+".
Etapa 3: Pressione o botão WPS no M1800 e depois pressione o botão WPS no WR2100.
Unidade de malha principal: Flash branco
Unidade de malha adicional: pisca em branco e vermelho alternadamente
Passo 4:Irá para "Digitalização", então "Conectando".
Passo 5: Aguarde até que o LED do sistema do roteador complementar fique azul sólido e, em seguida, reposicione o WR2100.
Passo 6: Sucesso e aproveite a rede mesh.
Observação:
1. O roteador 4/5G só pode ser configurado como uma unidade mesh principal. Por exemplo:
2. Você não conseguirá acessar a interface web do roteador mesh adicional. Se desejar alterar as configurações, clique em "Status do sistema"->"Malha".
75 comentários
@Dear Wilfredo，
Estimado Wilfredo:
Por favor, elige uno de los M3000 y configúralo como punto de acceso. Luego, conéctalo al router wifi principal. Además, puedes configurar el mismo SSID, tipo de cifrado (como WPA2-PSK/WPA3-SAE) y contraseña wifi. Funcionará como deseas.
“Tengo un router del proveedor que me genera una red wifi, tengo tres Cudy M3000 wifi y quiero por medio de cable ethernet repitan la red wifi del router del proveedor con el mismo nombre y la misma contraseña”
Tengo un router del proveedor que me genera una red wifi, tengo tres Cudy M3000 wifi y quiero por medio de cable ethernet repitan la red wifi del router del proveedor con el mismo nombre y la misma contraseña
@Dear John,
1. Please check if the Mesh system is installed. You can login to the web page of the main mesh router, check the “Mesh” status card.
2. If yes, please check the status page of the satellite mesh router. Check if the backhaul is Wired?
3. If the backhaul is wired, please try to change the cable between the two router. Do you connect them directly or there is a switch between them?
4. What is the firmware version of the two routers? Please update to the latest and check again.
“I have two WR11000s which I’m trying to use as a mesh. The main router is connected to 1 Gbps fibre WAN. The secondary router is connected to the main router by wired ethernet (cat 6 cable).
When I plug my laptop into the secondary router with ethernet, I get a great connection (~800+ Mbps, according to speedtest.net). When I connect to the secondary router by wifi, the connection is hopeless — even sitting my laptop right next to the router, I get speeds of just a couple of Mbps, and lots of drop outs. This happens on all bands (2/5/6 GHz).
When I am connected to the main router by wifi, it works fine.
Any suggestions as to what might be going wrong?
Thanks!"
I have two WR11000s which I’m trying to use as a mesh. The main router is connected to 1 Gbps fibre WAN. The secondary router is connected to the main router by wired ethernet (cat 6 cable).
When I plug my laptop into the secondary router with ethernet, I get a great connection (~800+ Mbps, according to speedtest.net). When I connect to the secondary router by wifi, the connection is hopeless — even sitting my laptop right next to the router, I get speeds of just a couple of Mbps, and lots of drop outs. This happens on all bands (2/5/6 GHz).
When I am connected to the main router by wifi, it works fine.
Any suggestions as to what might be going wrong?
Thanks!
@Dear Kamil,
I think the camera is connected to the 2.4GHz WiFi of the router. You can try to change the mode of 2.4GHz to 802.11b+g+n mode. Then check if the camera is able to connect to it?
“I built a mesh network using four WR3600E routers, and the internet works great. However, this network was meant for cctv monitoring, and that’s where the problem appeared: when the routers are in mesh mode, the cameras won’t log into the network, no matter which WPA level we choose. Only after disabling encryption and the password do the cameras connect to Wi-Fi. The cameras are XMeye. Is there any solution? When connected to lan port everything works. I’ll add that when the router is not in mesh mode, the same camera connects to it normally with wifi. Regards.”