Recentemente, recebemos comentários de que nosso roteador não funciona corretamente com a T-Mobile, como por exemplo, sem internet ou só consegue internet IPv6, etc. Criamos um firmware beta para corrigir e melhorar o desempenho.
Passo 1: Abra um navegador e acesse http://cudy.net ou http://192.168.10.1. Digite a senha para fazer login.
Para mais detalhes, consulteComo fazer login na interface web do Cudy Router?
Passo 2: Vá paraConfigurações avançadas->Firmwarepara atualizar o firmware beta abaixo.
Firmware LT18:Download do software Cudy LT18
Firmware LT450
V1 (cartão Micro SIM):LT450-R9-1.15.5beta-20221121-180014-flash.bin
V2 (cartão Nano SIM):Download do software Cudy LT450
Firmware LT500
V1 (cartão Micro SIM):LT500-R9-1.15.5beta-20221121-180014-flash.bin
V2 (cartão Nano SIM):Download do software Cudy LT500
Firmware LT500D
V2 (cartão Nano SIM):Download do software Cudy LT500D
Etapa 3:Configurações avançadas->IPv6Para habilitar o IPv6, Salvar e Aplicar.
Passo 4: Vá paraConfigurações avançadas->TTL->Personalizadoe definirTTLpara65,HLpara65.
Passo 5: Vá paraConfigurações gerais->4G/Celular.
1. ConjuntoModo de redecomoSomente 4G
2. DefinirPerfil APNcomoManual
3. DefinirAPNcomofast.t-mobile.com(Observação: para um plano de IP estático, defina o APN como b2b.static)
4. Sairnome de usuárioesenhaem branco.
5. DefinirAutenticaçãocomoPAP+CHAP
Observação: para o APN, você precisará confirmar novamente, pois ele pode mudar sem aviso prévio.
Passo 6: Salvar e aplicar, aguardar cerca de 5 minutos e verificar a conexão. Se ainda assim não funcionar, entre em contato com support@cudy.com com o arquivo bin de diagnóstico. (Ferramentas de Diagnóstico->Diagnóstico->GO->Download)
32 comentários
@Trey Jones,
Our technical support has sent you the solutions via email. Please check.
“Where are the links?”
Where are the links?
@Alex,
Our technical support has contact you via email. Please check.
“Dear Cudy Team,
I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237."
@Rebecca,
Thank you for contacting Cudy support team. You can download the firmware on the website. https://www.cudy.com/pages/download-center/lt500-2-0
But for now, there is no OpenWRT firmware on OpenWRT forum. So I think you can’t update the router to the OpenWRT firmware.
“I own a Cudy LT-500 v 2.0 router amd am requesting the latest beta version of the firmware for this router as well as the latest releases of all applicable software necessary to install OpenWRT on this device. None of the listed download links referenced in FAQ are accessible. Thank you in advance.”
Dear Cudy Team,
I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237.
After using version 2.1.1 for about a month on the T-Mobile network, I began experiencing frequent disconnects from the cellular network, usually several times per day. To address this, I have rolled back to version 1.15.28-20230410-094349 and will monitor if the problems continue.
I wanted to report this issue regarding version 2.1.1 and provide feedback. Thank you for continuing to create excellent routers!