WISP režīms:
WISP režīmā maršrutētājs ļauj vairākiem lietotājiem koplietot WISP interneta savienojumu. Šādā veidā LAN pieslēgvietas ierīces koplieto vienu un to pašu IP no WISP, izmantojot bezvadu pieslēgvietu. Kad bezvadu ports ir savienots ar WISP, tas darbojas kā WAN ports.
Bieža tīkla topoloģija:
1.solis: Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1.
Sīkāku informāciju skatīt Kā pieteikties Cudy maršrutētāja tīmekļa saskarnē?
2. solis: Atvērsies ātrās iestatīšanas logs, izvēlieties "WISP", pēc tam dodieties uz "Nākamais".
3. solis: Izvēlieties savu "Laika joslu".
4. solis: Izvēlieties saimniekdatora tīklu, kuru vēlaties paplašināt. Noklikšķiniet uz "Pieslēgt".
Vai noklikšķiniet uz Vispārējie iestatījumi->WISP->Atļaut un pēc tam izvēlieties saimniekdatoru tīklu, kuru vēlaties paplašināt.
5. solis: Iesniedziet uzņēmēja tīkla bezvadu paroli.
Piezīme: Pārliecinieties, ka ievadītā bezvadu tīkla parole ir pareiza, pretējā gadījumā konfigurācija nevar izdoties.
6. solis: Pielāgojiet bezvadu tīkla nosaukumu un paroli vai saglabājiet tos pēc noklusējuma.
7. solis: Spiediet "Save &; Apply", lai pabeigtu konfigurāciju.
8. posms: No sistēmas pārstartēšanas pagaidiet dažas sekundes, kad atkal parādīsies pieteikšanās lapa, un varat baudīt internetu.
120 comments
Both Pavel and I encountered the same issue in WIPS mode, where the device fails to connect to most 5GHz Wi-Fi networks. I saw that support recommended using channels 36–48 (UNII-1). May I ask how to connect to channels 52–64 (UNII-2) and 100–144 (UNII-2 Extended)? Many 5GHz Wi-Fi networks in Hong Kong operate on the 100–144 range. I am using the TR1200 V1 with firmware version 2.4.15 CN.
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”