WISP režīms:
WISP režīmā maršrutētājs ļauj vairākiem lietotājiem koplietot WISP interneta savienojumu. Šādā veidā LAN pieslēgvietas ierīces koplieto vienu un to pašu IP no WISP, izmantojot bezvadu pieslēgvietu. Kad bezvadu ports ir savienots ar WISP, tas darbojas kā WAN ports.
Bieža tīkla topoloģija:
1.solis: Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1.
Sīkāku informāciju skatīt Kā pieteikties Cudy maršrutētāja tīmekļa saskarnē?
2. solis: Atvērsies ātrās iestatīšanas logs, izvēlieties "WISP", pēc tam dodieties uz "Nākamais".
3. solis: Izvēlieties savu "Laika joslu".
4. solis: Izvēlieties saimniekdatora tīklu, kuru vēlaties paplašināt. Noklikšķiniet uz "Pieslēgt".
Vai noklikšķiniet uz Vispārējie iestatījumi->WISP->Atļaut un pēc tam izvēlieties saimniekdatoru tīklu, kuru vēlaties paplašināt.
5. solis: Iesniedziet uzņēmēja tīkla bezvadu paroli.
Piezīme: Pārliecinieties, ka ievadītā bezvadu tīkla parole ir pareiza, pretējā gadījumā konfigurācija nevar izdoties.
6. solis: Pielāgojiet bezvadu tīkla nosaukumu un paroli vai saglabājiet tos pēc noklusējuma.
7. solis: Spiediet "Save &; Apply", lai pabeigtu konfigurāciju.
8. posms: No sistēmas pārstartēšanas pagaidiet dažas sekundes, kad atkal parādīsies pieteikšanās lapa, un varat baudīt internetu.
120 comments
@Dear Ruslan,
Our technical support has sent you the firmware via email. Please check.
“Dear Support,
Could you please be so kind and send me BETA FW with WISP support for WR3600E for my own risk?
Thanks,
Ruslan (menano@mail.ru)”
Dear Support,
Could you please be so kind and send me BETA FW with WISP support for WR3600E for my own risk?
Thanks,
Ruslan (menano@mail.ru)
@Dear Kyle,
If you enable both WAN connection and WISP connection. The WAN connection will be main connection. The WISP connection will be a backup. So if you want to switch to WAN connection. You don’t need to disable WISP. But if you want to switch to WISP connection. You need to disable WAN or disconnect from the internet.
“I have an AX3000 router which needs to work in both WISP mode and with direct Ethernet port connection due to local conditions. It works with both setups if I manully change the configuration and reboot the router. My question is whether I need to enable/disable WISP when switching back and forth or will the router automatically switch if I leave WISP enabled and subsequently connect with cable to our local Ethernet network via the WAN port. My tests trying this have been inconsistent and I can’t verify it is the router or the local network configuration.”
I have an AX3000 router which needs to work in both WISP mode and with direct Ethernet port connection due to local conditions. It works with both setups if I manully change the configuration and reboot the router. My question is whether I need to enable/disable WISP when switching back and forth or will the router automatically switch if I leave WISP enabled and subsequently connect with cable to our local Ethernet network via the WAN port. My tests trying this have been inconsistent and I can’t verify it is the router or the local network configuration.
@Dear Paulo,
We have plan to add this function on next firmware 2.5.×. In addition, you need to the backhaul Wi-Fi connection will use the same channel as you set on the main Wi-Fi, can’t be changed.
“WR11000 does no allow yet to change the wifi channel manually. in WISP or wireless extender. When do you expect to make available the firmware correction?”