PoE Accs.

POE40

Apžvalga
Funkcijos
Specifikacijos
Atsisiųsti

Galia, greitis ir valdymas viename

1 PoE In | 4 PoE Out

Expand your PoE network effortlessly with one input (up to 90W) powering 4 outputs (up to 30W each).

Gigabitinio greičio patirtis

Experience ultra-fast data transmission with a dedicated Gigabit port, ensuring blazing speeds and reliable connectivity for your network.

VLAN režimas

Užkirsti kelią žemyn einančių jungčių prievadams bendrauti tarpusavyje, taip padidinant tinklo saugumą.

Išplėtimo režimas

Prolong the transmission to a maximum of 250 meters and simplify installation. (These ports' speed will be capped at 10 Mbps.)

NaN -Infinity

4 kanalų Gigabit PoE plėstuvas

4 kanalų Gigabit PoE plėstuvas, POE40 2.0

POE40 2.0

Product variants

4 kanalų PoE plėstuvas, kuris padalina vieną PoE jungtį į keturias, skirtas keliems klientams, ir padidina PoE atstumą iki 250 m. (100 m, kai 10/100/1000 Mbps, 250 m, kai 10 Mbps)

GbE įėjimas, 4 × GbE išėjimas
802.3bt/at/af įvestis
4× 802.3at/af Max 30W Output ¹
High-Speed Extension up to 100 meters ²
Išplėsti 250 metrų perdavimo ³
VLAN klientų izoliavimui
Įjungtas/išjungtas "Watchdog"
Sieninis montavimas

View full details

Modelio versija
Modelio versija	POE40 2.0
Protocols
Protocols	802.3 Protocols	802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3x Flow Control 802.3af PoE 802.3at PoE 802.3bt PoE
PoE
PoE	Uplink Stream	1× GbE, 802.3bt/at/af
	Uplink PIN Assignment	Mode A / Mode B / Four-Pair
	Downlink Stream	4× GbE, 802.3at/af
	Downlink Pin Assignment	Mode A
	Transimission Distance	Cat. 5e or higher cable: 100 meters at Gigabit Cat. 5e or higher cable: 250 meters at 10 Mbps Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating
	Transimission Distance Note	250-meter transmission is only available under the Extend mode.
Interfaces
Interfaces	Physical Buttons	VLAN/Default/Extend DIP Switch Watchdog Switch
	LED	Power
Power
Power	Power Input	≥60W is recommended
	Max Power Output	2× 30W or 4× 12.95W
	Max Power Output Note	The actual power output depends on input
	Max Power Consumption (W)	2W
Reliability
Reliability	Power Protection	Polarity Protection Overvoltage Protection Short-Circuit Protection Automatic Voltage Regulation
	EMC	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 4 Surge: RJ45: CM 4kV
	Environment	Ambient Operating Temperature: 0~40℃ (32~104 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~95% non-condensing Storage Humidity: 5%~95% non-condensing
Certifications
Certifications	FCC, CE
Mechanical
Mechanical	Install in a Daisy Chain	Up to 3 extenders in a chain
	Installation	Desktop Wall-mount
	Dimension	119×85×28 mm 4.69×3.35×1.1 inches
	Casing Material	Metal
	Product Weight	254.5 g (8.98 oz.)
Package Content
Package Content	POE40 Mounting Kit Installation Guide
Ordering Information
Ordering Information	Retail Package Dimension	151×96×40 mm 5.94×3.78×1.57 inches
	Retail Package Weight	EU: 372.4 g (13.14 oz.)
	Units per Carton	40
	Carton Net Weight	EU: 14.9 kg (32.85 lbs)
	Carton Gross Weight	EU: 15.5 kg (34.17 lbs)
	Carton Dimension	44.1×32×21.7 cm 17.36×12.6×8.54 inches

The actual available power equals the uplink power minus the loss on the line and device’s own power consumption (see the power consumption in the spec sheet). A PoE switch that supports standard IEEE PoE standard at 54 V is recommended.
100m extension is measured from the GbE out to the client devices. The section between uplink switch and GbE In is determined by the uplink switch.
The speed will be limited at 10 Mbps under the Extend/Long-Range mode.