PoE Accs.
POE15

Need More Reach? Add Another One

Prolong the PoE by installing up to 3 extenders in a daisy chain. Each PoE extender consumes up to 2W of power from the PoE line.

Need More Reach? Add Another One

Prolong the PoE by installing up to 3 extenders in a daisy chain. Each PoE extender consumes up to 2W of power from the PoE line.

Designed for Harsh Outdoor Environment

Level 3+ EMC Protection

Keep your connection online with robust protection. Additionally featuring Polarity / Overvoltage / Short-Circuit / Automatic Voltage Regulation protection.

Works in Extreme Temperatures

Works in 70 °C (158° F) and cold (-20°C / -4° F), making it suitable for outdoor installations such as parking lots, cruise decks, national parks, and more.

High-Speed. Plug and Play.

Gigabit Speed

Provides super-fast bandwidth suitable for connecting multiple cameras, high-speed access points, speakers down the line. *Connecting mulitple clients requries additional network switch at its end.

Wall-Mount Ready

Installation is straightforward with no configuration required. Mounting screws are included in the box.

FAQ

  1. What is a PoE Extender?
    A PoE Extender allows you to extend both power and data over Ethernet beyond the standard 100 m (328 ft) limit. It receives PoE input from a PoE switch or injector and outputs power and data to the next device or another extender.
  2. Can I connect a PoE Extender directly to a non-PoE switch?
    No. A non-PoE switch does not provide power through Ethernet.
    You must use a PoE injector between the switch and the extender to supply power if you do not have a PoE switch.
  3. My PoE Extender is not working. What should I check first?
    Please verify the following:
  • The upstream device (switch or injector) supports PoE or PoE+ (802.3af/at).
  • Non-PoE switches cannot power the extender.
  • The Ethernet cable is Cat5e or higher, in good condition, and under 100 m per segment.
  • The total chain length (from the switch to the final device) does not exceed the maximum supported distance.
  • The powered device (PD), such as a camera or AP, does not exceed the extender’s PoE output capacity.
1 3

Lauko Gigabit PoE plėstuvas

Lauko Gigabit PoE plėstuvas, POE15 2.0

POE15 2.0

Atsparus oro sąlygoms PoE ilgintuvas, kuris padidina PoE atstumą iki 100 m.

  • IP67, -20~70 °C (-4~158 °F)
  • GbE įėjimas, GbE išėjimas
  • 802.3at/af įvestis
  • 802.3at/af Maksimalus 30 W galingumas 1
  • High-Speed Extension up to 100 meters 2
  • Sieninis montavimas
View full details
Modelio versija
Modelio versija POE15 2.0
Protocols
Protocols 802.3 Protocols
  • 802.3i 10 Mbps over Twisted Pair
  • 802.3u 100 Mbps over Twisted Pair
  • 802.3ab 1 Gbps over Twisted Pair
  • 802.3x Flow Control
  • 802.3af PoE
  • 802.3at PoE
PoE
PoE Uplink Stream 1× GbE, 802.3at/af
Uplink PIN Assignment Mode A / Mode B
Downlink Stream 1× GbE, 802.3at/af
Downlink Pin Assignment Mode A
Transimission Distance
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating
Power
Power Power Input ≥30W is recommended
Max Power Output 30W
Max Power Output Note The actual power output depends on input
Max Power Consumption (W) 2W
Reliability
Reliability Power Protection
  • Polarity Protection
  • Overvoltage Protection
  • Short-Circuit Protection
  • Automatic Voltage Regulation
EMC IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
IEC/EN 61000-4-5, Level X Surge: RJ45: CM 6kV
Grounding Methods Grounding Point
Environment Ambient Operating Temperature: -20~70 ℃ (-4~158 ℉)
Storage Temperature: -40~70 ℃ (-40~158 ℉)
Operating Humidity: 10%~100% non-condensing
Storage Humidity: 5%~95% non-condensing
Ingress Protection Rating IP67
Certifications
Certifications FCC, CE
Mechanical
Mechanical Install in a Daisy Chain Up to 3 extenders in a chain
Installation
  • Desktop
  • Wall-mount
Dimension 206×66×46.1 mm
8.11×2.6×1.81 inches
Casing Material Metal
Product Weight 238.5 g (8.41 oz.)
Package Content
Package Content
  • POE15
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 136×81×61 mm
5.35×3.19×2.4 inches
Retail Package Weight 345.5 g (12.19 oz.)
Units per Carton 40
Carton Net Weight 13.8 kg (30.42 lbs)
Carton Gross Weight 14.4 kg (31.75 lbs)
Carton Dimension 35.2×32.4×29.3 cm
13.86×12.76×11.54 inches
  1. The actual available power equals the uplink power minus the loss on the line and device’s own power consumption (see the power consumption in the spec sheet). A PoE switch or PoE adapter that supports standard IEEE PoE standard at 54 V is recommended as the uplink power source.
  2. 100m extension is measured from the GbE out to the client devices. The section between uplink switch and GbE In is determined by the uplink switch.