Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1319 comments
Please build the firmware under openwrt for the WBR3000AUX
@Dear Sidney,
Our technical support has sent you the firmware via email. Please check.
“Hi, i don’t see a AP3000 Ceiling OpenWRT intermediate firmware. How do i flash it to install openWRT ?”
@Dear JC
Our technical support has contacted you via email. Please check.
“Hi,
I have the same problem as Manos on Nov 20th except I have a WR3000H.
“wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?”
This cudy_wr3000h-v1-sysupgrade_20251119.bin file was not supposed to do this, I think.”
@Dear ABDULLAH,
We have plan to add the DNS over HTTPS on next firmware update 2.5.×. The IOT network will be later.
“Cudy M3000 1.0 kindly please add DNS over HTTPS. I’ve seen TP-Link Deco X50 has got it via firmware update but not my Cudy M3000 1.0 have it yet.
Also, my Cudy M3000 1.0 don’t have separate network creation for IoT devices!! TP-Link has this feature!!!"
Hi, i don’t see a AP3000 Ceiling OpenWRT intermediate firmware. How do i flash it to install openWRT ?