Įspėjimai
Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.
Aprašymas
- Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
- Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
- Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.
Garantija:
Cudy pareiškia
- Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd." .
- Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd. .
- Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.
Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive
ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector
1152 comments
@Dear Dan,
Do you remember what is firmware version before update to the OpenWrt firmware? If it was 2.4.7, you can recover it via the TFTPD tool. Please refer to this article.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=b2bfff253&ss=r
If other firmware version, please keep using the OpenWrt firmware. Can not be recovered.
“Dear Cudy support team,
I am trying to restore the factory firmware after OpenWrt on AP3000 V1.0, but I am facing a problem.
Device information:
- Model: AP3000 V1.0
- Serial number: AP3000_P251600697 EU1.0
- Current firmware: OpenWrt 25.12.0
The problem is:
When trying to flash through the openwrt web interface (without saving the settings):
I downloaded the file “AP3000-R49-2.4.7-20260115-152710-sysupgrade.bin”, but the router rejects it with the error “Invalid file”.
According to the instructions for returning: Connected directly to a PC with IP:192.168.1.10, holding reset
Connected the power. But in this case, I can’t connect to the router. The special interface for specifying the firmware file doesn’t open at the address 192.168.1.1.
For the OpenWrt firmware, you provided a special firmware for the transition. I understand that you also need a special version to return to the factory firmware.
Please help me return to the factory firmware.
Thank you for your assistance. Best regards, Dan
"
@Dear Александр,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
For WR3000 V2.0, it is impossible to develop the OpenWrt firmware currently.
“Please tell me when the OpenWRT firmware for WR3000 V2.0 will be available.”
@Dear Андрей,
I just uploaded the intermediate firmware for WR1300S V1.0 to the Google Drive. You can download it.
“When will there be an openwrt for WR1300S ? The kernel and sysupgrade were previously sent”
Здравствуйте, Павел,
Наша служба технической поддержки отправила вам прошивку для перехода на WR3000 V1.0 по электронной почте.
“@@Уважаемый Павел,
У вас маршрутизатор WR3000 V1.0, а не WR3000E V1.0. Пожалуйста, используйте прошивку для WR3000 V1.0.
“Версия прошивки
2.4.19-20250828-192837
Аппаратная версия
WR3000 V1.0 SN:WR3000254901313 EAEU1.0" Где ее скачать на гугл диске ее нет. Вышлите переходную прошивку на почту"
Please tell me when the OpenWRT firmware for WR3000 V2.0 will be available.